These DC electronic loads have been designed for the testing and characterisation of a wide range of DC power sources such as batteries and solar cells as well as conventional power supply units. The wide voltage and current range together with multimode operation and built-in transient generator make these units versatile and comprehensive pieces of test equipment.
The units can operate in constant current, constant resistance, constant conductance, constant voltage and constant power modes. 80V and 80A voltage and current range enable the units to test a very wide range of power sources and 400W continuous dissipation give the units the headroom to be effective in high demand laboratory and test department applications.
A 256 x 112px backlit graphic LCD make the loads easy to control and both models feature remote control of levels and TTL control of On/Off and transient switching. In addition the 400P model (85-1304) adds full bus remote control via USB, RS-232, GPIB and LAN (Ethernet) interfaces.
Input current max. | 80A (rear terminals) |
30A (front terminals) | |
Input voltge max. | 80V |
Continuous input power | 400W |
Minimum operating volts | <2V |
Isolation voltage | 300V DC |
Operating modes | CC, CP, CR, CG, CV |
Meter display | 256 x 112px backlit graphic LCD |
Protection | Power, current, voltage, temperature, sense error |
AC Input | 110 to 120/220 to 240V AC |
Power consumption | 30VA |
Operating temperature range | +5°C to +40°C |
Dimensions | 130 x 212 x 435mm (3U x ½ rack) |
Weight | 5.7kg |