This 2-way PCB terminal block from WAGO has 4 solder pins per pole for increased stability. The block has a pin spacing of 15mm (0.591in.) and is opened and closed by means of finger-operated levers.
- High-current terminal strips with lever-operated cage clamps
- Tool-free opening and closing: levers can be operated with fingers
- Several units can be held open simultaneously, ideal for multi-core cables
- Four solder pins per contact point for high mechanical stability
- 600V UL for 12.5mm pin spacing
- Pin and dimensions compatible with high-current, screw-type terminal blocks
- WAGO type 2716-202
| Pitch |
16mm |
| No. of Ways |
2 |
| Mounting Type |
Through Hole |
| Mounting Direction |
Vertical |
| Wire Gauge (AWG) |
16 to 6AWG |
| Wire Termination |
CAGE CLAMP® |
| Category |
PCB Terminal Blocks and Connectors |
| Colour |
Grey |
| Current Rating |
76A |
| Depth |
30mm |
| Depth inch |
1.181inches |
| Fine-stranded conductor max. AWG |
6 AWG |
| Fine-stranded conductor max. mm² |
16mm² |
| Fine-stranded conductor min. AWG |
6 AWG |
| Fine-stranded conductor min. mm² |
1.5mm² |
| Flammability class according to UL94 |
V0 |
| Height |
33.3mm |
| Height inch |
1.311inches |
| No. of Levels |
1 |
| Product Main Function |
PCB terminal block |
| Rated current |
76 A |
| Rated surge voltage (II / 2) |
8 kV |
| Rated voltage (II / 2) |
1000 V |
| Single-stranded conductor max. AWG |
6 AWG |
| Single-stranded conductor max. mm² |
16mm² |
| Single-stranded conductor min. AWG |
16 AWG |
| Single-stranded conductor min. mm² |
1.5mm² |
| Stripping length of 1 mm |
12mm |
| Stripping length up to 1 mm |
13mm |
| Total number of potentials |
2 |
| Total number of terminal points |
2 |
| Type of operation |
Lever |
| Unit Weight |
KGM |
| Voltage Rating |
600V |
| Weight |
19.960g |
| Width |
25mm |
| Width inch |
0.984inches |
{{SessionBasket.ItemCount }}
