The WAGO DIN Rail Terminal Block, Spring Cage 15mm 230V AC/DC is a ground conductor disconnect terminal block with testing facility. Cutter holder orange, grey.
The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.
- 2006-1671/1000-851
- Grey colour
- CAGE CLAMP®S Connection
- 37 x 15 x 96.3mm (H x W x D)
- Front-entry wiring
| Type |
Ground conductor disconnect terminal block |
| Pitch |
15 mm |
| No. of Levels |
1 |
| Termination |
Push-in Cage clamp |
| Width |
15mm |
| Wire Gauge (mm²) |
10mm² |
| Category |
Rail-Mount Terminal Blocks |
| Colour |
Grey |
| Connectable conductor materials |
Copper |
| Connection |
Push-in CAGE CLAMP® |
| Continuous Use Temperature |
-60 … +105 °C |
| Fine-stranded conductor max. AWG |
8 AWG |
| Fine-stranded conductor max. mm² |
10mm² |
| Fine-stranded conductor min. AWG |
8 AWG |
| Fine-stranded conductor min. mm² |
0.5mm² |
| Flammability class according to UL94 |
V0 |
| Height |
96.3mm |
| Height inch |
3.791inches |
| Maximum Wire Size AWG |
10 |
| Nominal cross-section mm² |
6mm² |
| Number of pins |
4 |
| Product Main Function |
Disconnect terminal block |
| Single-stranded conductor max. AWG |
8 AWG |
| Single-stranded conductor max. mm² |
10mm² |
| Single-stranded conductor min. AWG |
20 AWG |
| Single-stranded conductor min. mm² |
0.5mm² |
| Stripping length of 1 mm |
13mm |
| Stripping length up to 1 mm |
15mm |
| Total number of pins |
4 |
| Type of operation |
Operating tool |
| Unit Weight |
KGM |
| Weight |
40.600g |
| Width inch |
0.591inches |
| Wiring Type |
Front-entry wiring |
{{SessionBasket.ItemCount }}
