Sign in to your account to see your Schools Discount Scheme pricing

Tomorrow's Engineers Week 2026: 4 STEM projects for secondary schools

Written by Millie Lancaster Published on 03 November 26

Shape our future: 4 STEM projects for the secondary classroom

Four simple, ready-to-run Tomorrow's Engineers Week projects that let students aged 11 to 16 solve real problems, just like engineers do. Each one comes with a simple parts list you can order from Rapid.

Tomorrow's Engineers Week runs from the 9th to the 13th of November 2026. This year's theme is Shape our future. It asks young people to explore how engineering and technology tackle real-world challenges, and how they could help.

The best way to show students what engineers do is to let them try it. Each project below starts with a real problem, then gives students something to build, test and improve. You'll also find the jobs that use the same skills, so students can see where their learning could lead.

What is Tomorrow's Engineers Week?

Tomorrow's Engineers Week (#TEWeek26) is the UK's biggest celebration of engineering careers for young people. It's run every year by EngineeringUK, and in 2025 more than 60,000 young people took part.

Schools can join in for free, with lesson plans and activities, assemblies and careers resources. For students thinking about their next steps, EngineeringUK's guide to skills and career pathways shows the routes into engineering, from apprenticeships to degrees. The projects below bring the week to life in your classroom.

The projects at a glance

ProjectReal-world problemBest forSubjectsTimeCost per group (ex VAT)
1. Power from the sunClean, affordable energyAges 11–14 (KS3)D&T, science1–2 lessonsAbout £33
2. Help someone stay safeIndependent livingAges 11–16 (KS3–KS4)Computing, D&T2–3 lessonsAbout £32
3. Build a smart homeSaving energy at homeAges 11–16 (KS3–KS4)Computing, D&T2–3 lessonsAbout £30
4. Monitor your airAir quality and climateAges 14–16 (KS4)Computer science, engineering, electronics3–4 lessonsAbout £37

No experience? No problem. None of the projects need soldering, and all the coding uses free tools that run in a web browser.

Project 1: Power from the sun

Ages 11–14 · D&T and science · 1–2 lessons

The challenge: Many communities around the world still have no reliable electricity. Can your team design a solar-powered fan that keeps working when the light changes?

What students do

  1. Connect a solar module to a small motor using crocodile leads.
  2. Use a multimeter to measure the voltage in different light, and at different angles to the light.
  3. Record the results and find the best angle for the panel.
  4. Design and make a stand or housing that holds the panel at that angle, with a card fan on the motor.

Skills they practise: simple circuits, measuring voltage, fair testing and designing for a real user.

Jobs that use these skills: renewable energy engineer, solar installer, wind turbine technician, electrical engineer.

Parts list (per group)

ItemRapid codeQtyPrice each (ex VAT)
TruOpto solar module 3V 100mA56-01241£3.53
TruMotion solar motor 2V37-04411£3.63
VOLTCRAFT crocodile leads, pack of 1051-52481 pack£5.14
Rapid RHMM17 digital multimeter90-00051£20.59

Take it further: Compare solar with wind. The Horizon wind energy science kit (06-6559, £89.44) or the Horizon renewable energy education set (06-6551, £147.28) work well as a class demonstration.

Project 2: Help someone stay safe

Ages 11–16 · Computing and D&T · 2–3 lessons

The challenge: Many older people live alone. A fall at home can go unnoticed for hours. Can your team design a wearable alert that tells a carer when help is needed?

What students do

  1. Code one micro:bit to spot a sudden fall using its built-in motion sensor (accelerometer). Add a button to call for help.
  2. Code a second micro:bit to receive the alert by radio and sound an alarm.
  3. Test it. Does it go off when someone just sits down? Adjust the code until it's reliable.
  4. Design a comfortable, wearable case for the user.

Skills they practise: coding with inputs and outputs, wireless communication, testing and improving, and designing for a real user's needs.

Jobs that use these skills: biomedical engineer, assistive technology designer, software developer, product designer.

Parts list (per group)

ItemRapid codeQtyPrice each (ex VAT)
BBC micro:bit V2 Go Bundle (micro:bit, USB cable, battery holder and batteries)75-02782£16.21

The micro:bit V2 has a built-in speaker, so there's nothing else to wire up. Students code it for free in Microsoft MakeCode.

Take it further: Build an automatic pill reminder. A Rapid Pro SG90 mini servo (37-1330, £5.35) can open a lid at set times. Connect it with crocodile leads (51-5248) and jumper wires (34-0679).

Project 3: Build a smart home

Ages 11–16 · Computing and D&T · 2–3 lessons

The challenge: Heating and cooling homes uses a lot of energy. Can your team design a smart blind that opens and closes by itself to keep a room comfortable?

What students do

  1. Build a model room from card or foamboard, with a window.
  2. Code a micro:bit to read its built-in light and temperature sensors.
  3. Connect a servo motor that opens the blind when it's dark or cold, and closes it when it's bright or too warm.
  4. Test the system and fine-tune the settings. Then present it like a real product pitch.

Skills they practise: sensors and control systems, coding decisions (if this, then that), modelling and prototyping, and thinking about energy use.

Jobs that use these skills: building services engineer, embedded systems engineer, electrician, smart home technician.

Parts list (per group)

ItemRapid codeQtyPrice each (ex VAT)
BBC micro:bit V2 Go Bundle75-02781£16.21
Rapid Pro SG90 mini servo37-13301£5.35
VOLTCRAFT crocodile leads, pack of 1051-52481 pack£5.14
Rapid jumper wires M-F 15cm, pack of 1034-06791 pack£3.31

Tip: Push jumper wires into the servo's plug, then clip crocodile leads from the jumper wires to the micro:bit's pins. No soldering needed.

Take it further: Add a remote control. Code a second BBC micro:bit V2 Go Bundle (75-0278) to send a radio signal, so users can open or close the blind from across the room. Then add a "holiday mode" that keeps the blind closed while the house is empty.

Project 4: Monitor your air

Ages 14–16 · Computer science, D&T and electronics · 3–4 lessons

The challenge: Poor air quality affects health, learning and the planet. Can your team build a wireless monitor that tracks the air in your classroom and shows the data online?

What students do

  1. Wire an environmental sensor to a Raspberry Pi Pico 2 W on a breadboard.
  2. Code it in MicroPython to read temperature, humidity, pressure and air quality.
  3. Send the readings over Wi-Fi to a simple web dashboard or spreadsheet.
  4. Collect data across a week. Spot patterns, such as when the room gets stuffy, and suggest improvements to the school.

Skills they practise: electronics prototyping, the I2C communication protocol, Python programming, the Internet of Things (IoT) and data analysis.

Jobs that use these skills: environmental engineer, IoT engineer, embedded software engineer, data scientist.

Parts list (per group)

You'll also need a micro USB cable to connect the Pico to a computer.

Prefer Arduino? The Arduino Uno R4 WiFi (73-4437, £19.79) works in place of the Pico. It suits groups who already code in the Arduino environment.

Take it further: Log data from several rooms and compare them. It also makes a strong starting point for a GCSE D&T or computer science project.

Tips for running the projects

  • Work in teams of 3 or 4. Give each student a real engineering role: designer, coder, tester or project manager.
  • Start with the problem, not the kit. Spend five minutes talking about who the product is for. It makes the build more meaningful.
  • Let them fail, then improve. Testing and fixing is what engineers do every day. Build in time for a second version.
  • Make the careers link clear. End each session by asking: "Which job would use what you did today?" EngineeringUK's real job stories let students meet real engineers.
  • Share their work. Post photos of your students' projects with #TEWeek26 and tag us. We'd love to see what they make.

Get your class ready for future careers in engineering

  • Shop the parts: click any product in the lists above, or search for its Rapid code.
  • Browse more: explore our full secondary education range.
  • Need help? Our education team can suggest kit for your class size and budget. Contact us.
  • Free TEWeek resources: download lesson plans and assemblies from EngineeringUK.

Buy from Rapid for a chance to win

Order through your Rapid education account between the 9th of November and the 8th of December 2026, and your school will be entered into our Tomorrow's Engineers Week prize draw.

We're giving away three bundles of classroom kit worth up to £600 to secondary schools across the UK. It's our way of supporting the engineers of tomorrow.

So what are you waiting for? Shop the parts for your projects now and you could win big for your classroom.

Shop secondary education

Prize draw terms and conditions

Prices are per item, exclude VAT and are correct on the 2nd of November 2026. Some small parts are sold in packs, as shown.

Frequently asked questions

What are good STEM projects for KS3 and KS4?

The best KS3 STEM and KS4 STEM projects give students a real-world problem to solve, then let them design, build, test and improve a solution. Good secondary STEM projects include a solar-powered fan, a wearable fall alert coded on a micro:bit, a smart blind that responds to light and temperature, and a wireless air-quality monitor. Each one links to real engineering careers, so students can see where their skills could lead.

What are some simple electronics projects for KS3?

Simple KS3 electronics projects use a few low-cost electronic components, such as solar modules, motors, servos, sensors and crocodile leads, with no soldering needed. Students can build a solar-powered fan and measure its voltage with a multimeter, or connect a servo to a BBC micro:bit to make a smart blind. These KS3 electronics projects fit well into KS3 design and technology electronics lessons and teach how inputs, processes and outputs work together.

How do these projects support KS3 science, KS4 science and GCSE subjects?

The projects support KS3 science and KS4 science topics such as electricity, energy transfer and renewable energy, using fair testing and real measurements. They also support KS3 and GCSE design and technology, where students design for a real user, and KS3 computing and GCSE computer science, where they code inputs, outputs and wireless communication. The air-quality monitor makes a strong starting point for a GCSE D&T or computer science project.

How can my secondary school take part in Tomorrow's Engineers Week?

Tomorrow's Engineers Week 2026 runs from the 9th to the 13th of November, with the theme "Shape our future". Secondary schools can take part for free using EngineeringUK's lesson plans, assemblies and careers resources. Running a hands-on STEM project during the week, like the four projects above, is a great way to show students aged 11 to 16 the real engineering careers they could go on to.

Share

Post a Comment



Trustpilot