Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night. Also features integral air compressor with pressure gauge for accurately topping/pumping up tyres. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V/1A). Supplied with mains charger.
- Cable & Clamp Length: 0.72m.
- Composite case with moulded rubber protection, integral battery cable storage and carry handle.
- LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators.
- Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night.
- Integral air compressor with pressure gauge for accurately topping/pumping up tyres.
- Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug.
- Features a USB outlet (5V/1A).
- Model No. RS1322HV
| Type |
Jump Starter/Power Pack |
| Auxiliary Output |
USB - 5V/1A, 2 x 12V Port |
| Cable & Clamp Length |
725mm |
| Cold Cranking Amps |
400A |
| Integral Air Compressor |
Yes |
| Maximum Pressure |
60psi |
| Nett Weight |
6.75kg |
| Peak Amps |
900A |
| Voltage |
12V |
To use this facility please Sign In.
Sign In
{{SessionBasket.ItemCount }}
