LOCTITE 222 is a low-strength thread locker that still permits screws to be adjusted. It is ideal for use on low-strength metals like aluminium and brass which could fracture during disassembly.
LOCTITE 222 works on all metals, including passive substrates, such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., engine oils, corrosion-prevention oils and cutting fluids.
- Cures in the absence of air to provide a tough retaining medium for threaded parts
- Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Permits disassembly with hand tools
- Especially suited to small thread sizes
- P1 NSF Reg. No.: 123002
- Supplied in a 50ml bottle
- LOCTITE type 222
| Type |
Threadlocker |
| Strength |
Low |
| Dispensing Method |
Bottle |
| Volume |
50ml |
| Agency approvals / certificates / specifications |
NSF P1 Reg. No 123002 |
| Application method |
Dispense system, Manual |
| Application temperature |
-55.0 °C - 150.0 °C ( -65.0 °F - 300.0 °F ) |
| Applications |
Threadlocking |
| Breakaway torque, M10 Steel Nuts/Bolts |
6.0 N·m ( 50.0 in./lb. ) |
| Colour |
Purple |
| Cure type |
Anaerobic cure |
| Fixture time |
20.0 min |
| Key characteristics |
Thixotropic, General purpose, Strength: low Strength, Fluorescent, Disassembly: removable, Mix: no mix required |
| Physical form |
Liquid |
| Prevail torque, M10 Steel Nuts/Bolts |
4.0 N·m ( 35.0 in./lb. ) |
| Recommended for use with |
Metal, Metal: passive metal |
| Technology |
Acrylic |
| Viscosity, Speed 20 RPM |
1200.0 mPa·s (cP) |
To use this facility please Sign In.
Sign In
{{SessionBasket.ItemCount }}
