This splice connector terminal from WAGO has a cage spring contact connection for use with single, multiple and fine stranded copper conductors.
The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.
- Cross-section: 0.5 to 2.5mm²
- Grey colour
- Height 15.5mm
- Width 8.5mm
- Depth 42mm
- Manufacturer's part 224-201
| Wire Gauge |
16 AWG |
| Category |
Installation Terminal Blocks and Connectors;Lighting Connection |
| Colour |
Grey |
| Connectable conductor materials |
Copper;Aluminum |
| Connection |
CAGE CLAMP® |
| Cross-section |
0.5 to 2.5mm2 |
| Current Rating |
16A |
| Depth inch |
1.654 inches |
| Depth mm |
42mm |
| Fine-stranded conductor max. mm² |
2.5 mm² |
| Fine-stranded conductor min. AWG |
16 AWG |
| Fine-stranded conductor min. mm² |
0.5 mm² |
| Height inch |
0.61 inches |
| Height mm |
15.5mm |
| Number of Ways |
2 |
| Product Main Function |
Lighting connector |
| Rated current |
24 A |
| Rated surge voltage (II / 2) |
4 kV |
| Rated voltage (II / 2) |
400 V |
| Series |
224 |
| Single-stranded conductor max. AWG |
16 AWG |
| Single-stranded conductor max. mm² |
2.5 mm² |
| Single-stranded conductor min. AWG |
20 AWG |
| Single-stranded conductor min. mm² |
0.5 mm² |
| Stripping length of 1 mm |
9mm |
| Stripping length up to 1 mm |
11mm |
| Termination |
Splice |
| Total number of potentials |
1 |
| Total number of terminal points |
2 |
| Type of operation |
Push-in |
| Unit Weight |
KGM |
| Weight |
4.600 g |
| Width inch |
0.315 inches |
| Width mm |
8mm |
| Wiring Type |
Side-entry wiring |
To use this facility please Sign In.
Sign In
{{SessionBasket.ItemCount }}
