The WAGO DIN Rail Terminal Block, Multi-Level 5.2mm 24A is a 4-conductor double deck terminal block. Through/Through, L/L, without marker carrier.
The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.
- 2002-2401
- Grey colour
- Front-entry wiring
- CAGE CLAMP®S Connection
- 52.5 x 5.2 x 104.8mm (H x W x D)
| Type |
Terminal block |
| No. of Ways |
4 |
| Termination |
Push-in Cage clamp |
| Category |
Rail-Mount Terminal Blocks |
| Colour |
Grey |
| Connectable conductor materials |
Copper |
| Connection |
Push-in CAGE CLAMP® |
| Continuous Use Temperature |
-60 … +105 °C |
| Fine-stranded conductor max. AWG |
12 AWG |
| Fine-stranded conductor max. mm² |
4 mm² |
| Fine-stranded conductor min. AWG |
12 AWG |
| Fine-stranded conductor min. mm² |
0.25 mm² |
| Flammability class according to UL94 |
V0 |
| Height |
105.1mm |
| Height inch |
4.138 inches |
| Nominal cross-section mm² |
2.5 mm² |
| Product Main Function |
Double-deck terminal block;Through terminal block |
| Rated current |
24 A |
| Single-stranded conductor max. AWG |
12 AWG |
| Single-stranded conductor max. mm² |
4 mm² |
| Single-stranded conductor min. AWG |
22 AWG |
| Single-stranded conductor min. mm² |
0.25 mm² |
| Stripping length of 1 mm |
10mm |
| Stripping length up to 1 mm |
12mm |
| Total number of pins |
8 |
| Type of operation |
Operating tool |
| Unit Weight |
KGM |
| Weight |
15.759 g |
| Width inch |
0.205 inches |
| Width mm |
5.2mm |
| Wiring Type |
Front-entry wiring |
To use this facility please Sign In.
Sign In
{{SessionBasket.ItemCount }}
