Phoenix Contact 2866734 QUINT-PS/3AC DIN Rail Power Supply 24V DC 5A 120W

A power supply from Phoenix Contact with SFB technology for highest system availability. With 6-line operating current for 12MS, the standard-output switch also triggers reliably and fast. The preventive function monitoring indicates critical function status, before error occurrence.
Offering a steady start in heavy load through Power boost, plus remote monitoring through active switching output and potential free relais contact. Balancing of voltage cases and charging of battery by adjustable output voltage, while high reliability through long mains buffering times> 20 ms Connectors: screw terminals, including max.10A service friendly screw/pluggable terminals. Efficient operation of 3-phase devices, even when a phase permanently fails.
Worldwide use of wide-range output and international approval package, while other features include: higher operational safety in long power failure through buffering full load and higher MTBF > 500 000 h, parallel switch bar for increased output and redundancy, and simplified operation by LED fault monitoring.

• Input voltage range: 3x 320-575V AC, 450-800V DC
• Output: 24V DC 5A 120W, 3 phase
• Switched Mode
• Termination type: Screw terminals
• Preventive function monitoring
• Power boost-Reliable start of heavy loads
• SFB technology-fast trigger standard circuit breaker
• Manufacturer's part 2866734

For more information on this Phoenix Contact power supply, please see its datasheet.
DIN rail power supply

Output Voltage	24V
Output Current	5
Number of Outputs	2
Power Rating	120W
1st secondary output voltage	18 - 29.5V
2nd secondary output voltage	- - -V
3rd secondary output voltage	- - -V
Built-in height	130mm
Built-in width	N/Amm
Degree of protection (IP)	IP20
Degree of protection (NEMA)	Other
Depth	125mm
Direct mounting possible	false
Height	130mm
Input Voltage	320 - 575 AC
Max. output current 1	7.5A
Max. output current 2	N/AA
Max. output current 3	N/AA
Nominal value output current 1	5A
Nominal value output current 2	N/AA
Nominal value output current 3	N/AA
Nominal value output voltage 1	24V
Nominal value output voltage 2	N/AV
Nominal value output voltage 3	N/AV
Output voltage stabilized	true
Performance level according to EN ISO 13849-1	None
Power Consumption	268VA
Power Output	120W
Rated supply voltage AC 50 Hz	400 - 500V
Rated supply voltage AC 60 Hz	400 - 575V
Rated supply voltage DC	450 - 800V
Secondary voltage adjustable	true
Short-circuit-proof	true
SIL according to IEC 61508	None
Stabilized	true
Suitable for distribution board	false
Suitable for rail mounting	true
Suitable for safety functions	true
Type of electric connection	Screw connection
Voltage type (supply voltage)	AC
Wall mounting possible	false
Width	40mm
Width in number of modular spacings	N/A