PCB mounting terminal blocks for connecting wires directly to a circuit board.
Moulded-in latches allow the blocks to be joined together end-to-end without affecting the overall pitch.
- Number of ways: 2
- Nominal current: 32A
- Nominal voltage: 1000V
- Pitch: 9.52mm
- Connection method: screw connection with tension sleeve
- Mounting: wave soldering
- Colour: green
- Can be combined to create desired number of positions
- CSA, SEV & UL approvals
| Pitch |
9.5mm |
| No. of Ways |
2 |
| Mounting Type |
Through Hole |
| Mounting Direction |
Vertical |
| Wire Gauge (AWG) |
24 to 10AWG |
| Wire Termination |
Rising Clamp |
| Angle PCB/conductor connection |
N/A |
| Colour |
Green |
| Connectable conductor cross section fine-strand with cable end sleeve |
0.25 - 4mm² |
| Connectable conductor cross section fine-strand without cable end sleeve |
0.2 - 4mm² |
| Connectable conductor cross section multi-wired |
0.2 - 1.5mm² |
| Connectable conductor cross section solid-core |
0.2 - 6mm² |
| Connection type conductor |
Screw connection |
| Connection type PCB |
Soldering connection |
| Current Rating |
32A |
| Degree of protection (IP), mounted |
N/A |
| Diameter connection pin |
N/Amm |
| Height |
26.5mm |
| Housing Colour |
Green |
| Inflammability class of insulation material according to UL94 |
V0 |
| Length pin |
5mm |
| Material connection surface |
Tin |
| Material insulation body |
Other |
| Modular spacing connections |
9.52mm |
| No. of Levels |
1 |
| Number of electrical connections |
2 |
| Number of levels |
1 |
| Operating Temperature |
-40 - 105°C |
| Overvoltage category |
III |
| Pollution degree |
2 |
| Rated current In |
32A |
| Rated Surge Voltage |
8kV |
| Rated voltage |
1000V |
| Type of banding |
Carton (for SMD) |
| Type of fastening |
Solder |
| Type of PCB fastening |
Connecting contact |
| Voltage Rating |
1000V |
{{SessionBasket.ItemCount }}
