IP66 Type 4X Stainless Steel Junction Box Hinged Door Q-Turn Latch

The Hammond Eclipse Junior Range of Stainless Steel Junction Boxes are designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.

They provide watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet and also provide protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosures are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish.
The enclosures are designed to be used with a removable inner panel, which is formed from 14 gauge (2mm) thick, unpainted galvanised steel. Welded, tapped mounting studs are provided to enable fitting of the supplied internal mounting panel.
Enclosures have smooth, continuously welded seams without knockouts, cut-outs or holes and have a formed lip, designed to exclude flowing liquids and contaminants.
Continuous stainless steel hinges allow 180° opening, for ease of access.
The enclosure doors have a seamless poured-in place gasket and are secured with a quarter turn slot latch which can only be opened with a tool, for added safety.

A bonding stud is provided on the inside of the doors and a grounding stud is provided on the inside top of the enclosures, together with the necessary grounding hardware.
14 gauge welded rear mounting brackets and associated mounting hardware are also provided.