The MICROOPTO series of solid state relays and optocouplers are high performance devices that provide specific application oriented solutions.
An optocoupler device that is used to adjust sensitive TTL signals to the 24V DC as used in typical industrial automation applications. This aids in protecting the sensitive TTL electronics of the application by optically isolating the control and load.
- For adjusting TTL signals
- DIN-Rail mounting
- 6.1mm modular width
- Plug-in cross connection
| Type |
Relay |
| Mounting Type |
Rail |
| Height |
88mm |
| Width |
6.1mm |
| Length |
98mm |
| Ambient temperature |
-25 °C…60°C |
| Approvals |
CE, cULus |
| Blade size |
0.6 x 3.5 mm |
| Certificate no. (cULus) |
E141197 |
| Certificate No. (DNV) |
TAE000033E |
| Clamping range, max. |
4mm² |
| Clamping range, min. |
0.5mm² |
| Clamping range, rated connection |
2.5mm² |
| Clearance and creepage distances for |
> 3mm |
| Coil Voltage (DC) |
24V DC |
| Colour |
black |
| Contact Type |
1 NO contact (Bipolar |
| Continuous current |
0.1 A |
| Depth |
98mm |
| Depth (inches) |
3.8504 inch |
| Dielectric strength for control side - load 3 KVeff / 1 Min. |
Dielectric strength to mounting rail |
| Dropout Voltage |
1V |
| ECLASS 14 |
27-37-16-04 |
| ECLASS 15.0 |
27-37-16-04 |
| ence in manufacturing |
Type |
| ETIM 10 |
EC001504 |
| ETIM 8.0 |
EC001504 |
| ETIM 9.0 |
EC001504 |
| Flammability Rating |
UL94 V-0 |
| GTIN (EAN) |
4032248716159 |
| Height (inches) |
3.4685 inch |
| Impulse withstand voltage |
4 kV (1.2/50 µs) |
| Input frequency |
100 kHz |
| Input Voltage |
4.75 - 5.25 |
| IP Rating |
IP20 |
| Leakage Current |
20uA |
| Load category |
LC A |
| Load Current |
100mA |
| max. switching frequency (DC control |
100 kHz |
| Max. switching voltage, DC |
33 V |
| Maximum Temperature |
+60°C |
| Min. temperature |
-25°C |
| Mount |
DIN Rail |
| Mounting rail |
TS 35 |
| MTTF |
1686 a |
| Net weight |
34.8g |
| Nominal control current |
<100 µA |
| Number of Poles |
1 |
| Operating Temperature |
-20 to +60°C |
| Output Voltage |
19.2 - 28.8 |
| Package Quantity |
1 |
| Package/Case |
Module |
| Packaging |
Bulk |
| Pollution severity |
2 |
| Power Rating |
<0.5 mW |
| Product information |
The cable lengths must not exceed 30 m. |
| Protection degree |
IP20 |
| Protective circuit |
Varistor, Reverse polarity |
| Protective circuit, load side |
Free-wheeling diode |
| Rated control voltage |
5 V TTL |
| Rated control voltage (control input) |
5 V TTL |
| Rated operation current Ie |
0.1 |
| Rated switching current |
100mA |
| Rated switching voltage |
24 VDC ±20% |
| Rated voltage |
300 V |
| REACH SVHC |
Lead 7439-92-1 |
| Relay Type |
Relay |
| ROHS |
Conform |
| RoHS Compliance Status |
Compliant with exemption |
| SCIP |
d32f8e61-6733-45d6-9062-c95f9903aad6 |
| Series |
MOS |
| Short-circuit-proof |
No |
| solid-state relays, you benefit from our decades of experi- |
Order No. |
| Status indicator |
Green LED |
| Storage temperature |
-40 °C...60°C |
| stranded with wire-end ferrules DIN |
(DIN 46228-1), min. |
| stranded, max. |
stranded with wire-end ferrules DIN |
| Stripping length, rated connection |
7mm |
| Surge voltage category |
III |
| Switching Voltage |
24V DC |
| Switch-off delay |
<1 µs |
| Switch-on delay |
<1.3 µ |
| Termination |
Screw |
| Tightening torque, max. |
0.6 Nm |
| Tightening torque, min. |
0.4 Nm |
| Type of digital output |
Transistor |
| Type of output voltage |
DC |
| Type of voltage (input voltage) |
DC |
| UL 94 flammability rating |
V-0 |
| UL File Number Search |
UL Website |
| UL94 flammability rating |
V-0 |
| UL94 flammability rating component |
Component |
| Version |
MICROOPTO, Solid-state relay, Rated control volt- |
| Voltage drop at max. load |
<1 V |
| Voltage Rating |
5V |
| voltage) |
110mA |
| Width (inches) |
0.2402 inch |
| Wire connection method |
Screw connection |
| Wire cross-section, solid, max. |
4mm² |
| Wire cross-section, solid, min. |
0.5mm² |
| With LED indication |
true |
{{SessionBasket.ItemCount }}
