The Weidmüller 1469490000 is a PRO ECO 240W 24V 10A DIN Rail Power Supply that offers a low-cost switch mode power supply unit with high efficiency and system capability.
The 1469490000 is a switch mode PSU with above average performance values that can deliver genuine competitive advantages, and offers all the basic functions and delivers impressively high performance and flexibility.
This switch mode PSU features a compact design, high efficiency and are extremely easy to maintain. Thanks to temperature protection, short-circuit and overload resistance it can be universally used in all applications.
Wide ranging safety functions and compatibility with diode and capacitance modules, together with UPS components for setting up a redundant power supply, characterise solutions the PROeco can solve.
- Input voltage range: 1 phase
- Auto detect feature - makes switching between ranges unnecessary
- Tri-coloured LED provides local output status
- PROeco packs high performance into a compact housing
- Supplied with a Power Rating of 240W
- Supplied with a Current Rating of 10A
- Manufacturer's part: Weidmüller 1469490000
| Output Voltage |
24V |
| Output Current |
10A |
| Number of Outputs |
1 |
| 0.99 @ 115 V AC |
20 ms @ 115 V AC |
| 1st secondary output voltage |
24 - 24 |
| A @ 120 V DC |
120 V DC) |
| AC current consumption |
1,23 A @ 230 V AC / 2,47 |
| AC failure bridging time @ Inom |
> 20 ms @ 230 V AC / > |
| AC input voltage range |
85...264 V AC (derating at |
| against electrical shock |
DIN57100-410 |
| Alternative product |
PRO ECO 240W 24V 10A II |
| Available until |
2026-12-30T00:00:00+01:00 |
| Built-in height |
225 |
| Built-in width |
120 |
| Capacitive load |
unrestricted |
| Certificate no. (cULus) |
E258476 |
| Conductor cross-section, AWG/kcmil , 12 AWG |
Conductor cross-section, AWG/kcmil , 26 AWG |
| Conductor cross-section, flexible , max. 2.5 mm² |
Conductor cross-section, flexible , min. 0.5mm² |
| Conductor cross-section, rigid , max. |
6mm² |
| Conductor cross-section, rigid , min. |
0.5mm² |
| Connection system |
Screw connection |
| Contact load (NO contact) |
max. 30 V DC / 1 A |
| Continuous output current @ UNominal 10 A @ 55 °C, 6.25 A @ |
Ramp-up time |
| Current - Output 1 |
10A |
| DC current consumption |
1,18 A @ 370 V DC / 2,4 |
| DC input voltage range |
80...370 V DC (Derating @ |
| Degree of efficiency |
90% |
| Degree of protection (IP) |
IP20 |
| Delivery status |
This article will no longer be available in the future. |
| Depth |
100 |
| Depth (inches) |
3.937 inch |
| Derating curve |
Derating curve |
| Direct mounting possible |
false |
| Earth leakage current, max. |
3.5mA |
| ECLASS 14.0 |
27-04-07-01 |
| ECLASS 15.0 |
27-04-07-01 |
| Efficiency |
90% |
| Electric symbol |
Derating curve |
| Electrical machine equipment |
Acc. to EN60204 |
| EN55032 |
EN 61000-4-3 (RS), EN |
| ETIM 10.0 |
EC002540 |
| ETIM 8.0 |
EC002540 |
| ETIM 9.0 |
EC002540 |
| Floating contact |
Yes |
| For use with electronic equipment |
Acc. to EN50178 / |
| Frequency range AC |
47...63 Hz |
| GTIN (EAN) |
4050118275599 |
| GTIN (EAN) 4050118896350 |
thickness (A): 0.6mm |
| Height |
125 |
| Height (inches) |
4.9212 inch |
| Housing version |
Metal, corrosion resistant |
| Indication |
Green LED (Uoutput > |
| Input fuse (internal) |
Yes |
| Input Voltage |
85- to 364V |
| Inrush current |
max. 15 A |
| Insulation voltage input / earth |
2 kV |
| Insulation voltage output / earth |
0.5 kV |
| Insulation voltage, input/output |
3 kV |
| Interference immunity test acc. to |
EN 61000-4-2 (ESD), |
| Isolation Voltage |
3kV |
| Limiting of mains voltage harmonic |
According to EN |
| Max Input Voltage |
264V |
| Max Operating Temperature |
70°C |
| Max Output Current |
10A |
| Max Output Power |
240W |
| Max Power Dissipation |
240W |
| max. |
min. |
| Max. perm. air humidity (operational) |
5 %…95 % RH |
| Min Input Voltage |
85V |
| Min Operating Temperature |
-25°C |
| Mount |
DIN Rail |
| Mounting position, installation notice |
on terminal rail TS 35 |
| Net weight |
1002g |
| Noise emission in accordance with |
Class B |
| Nominal output current for Unom |
10 A @ 55°C |
| Nominal output voltage |
24V |
| Nominal power consumption |
266.7 VA |
| Nominal value output current 1 |
10 |
| Nominal value output voltage 1 |
24 |
| Operating Temperature |
-25 °C...70°C |
| Output Power |
240 W |
| Output voltage stabilized |
true |
| Output voltage, max. |
28 V |
| Output voltage, min. |
22 V |
| Output voltage, note |
(adjustable via |
| Overload protection |
Yes |
| Parallel connection option |
yes, max. 5 |
| Performance level according to EN ISO 13849-1 |
None |
| Pollution severity |
2 |
| Power Consumption |
266.7 |
| Power factor (approx.) |
> 0.94 @ 230 V AC / > |
| Power loss, idling |
2 W |
| Power loss, nominal load |
24 W |
| Power Output |
240 |
| power supplies |
61558-2-16 |
| Protection against dangerous shock |
Acc. to VDE0106-101 |
| Protection against inverse voltage |
Yes |
| Protection against over-heating |
Yes |
| Protection Class |
I, with PE connection |
| Protection degree |
IP20 |
| Protective separation / protection |
VDE0100-410 / acc. to |
| Rated input voltage |
100...240 V AC |
| Rated output voltage |
24 V DC ± 1 % |
| Rated supply voltage AC 50 Hz |
85 - 264 |
| Rated supply voltage AC 60 Hz |
85 - 264 |
| Rated supply voltage DC |
80 - 370 |
| REACH SVHC |
Lead 7439-92-1 |
| Reach SVHC Compliant |
No |
| Recommended back-up fuse |
4 A / DI, safety fuse |
| Relay on/off |
Output voltage |
| Residual ripple, breaking spikes |
<50 mVPP @ 24 V DC, IN |
| ROHS |
Conform |
| RoHS Compliance Status |
Compliant with exemption |
| Safety extra-low voltage |
SELV acc. to IEC 60950-1, |
| Safety transformers for switch-mode |
According to EN |
| SCIP |
6d8cdf22-8230-4af8-86c8-3558c716666d |
| Series |
PRO ECO (240W) |
| Shock resistance IEC 60068-2-27 |
15 g In all directions |
| Short-circuit protection |
Yes |
| Short-circuit-proof |
true |
| SIL according to IEC 61508 |
None |
| Stabilized |
true |
| Storage temperature |
-40 °C...85°C |
| Suitable for distribution board |
false |
| Suitable for rail mounting |
true |
| Suitable for safety functions |
false |
| Surge protection |
Varistor |
| Surge voltage category |
II |
| Tightening torque, max. |
0.6 Nm |
| Tightening torque, min. |
0.5 Nm |
| Type of electric connection |
Screw connection |
| UL File Number Search |
UL Website |
| Version |
Power supply, switch-mode power supply unit, 24 |
| Vibration resistance IEC 60068-2-6 |
1 g according to EN |
| Voltage - Output 1 |
24V |
| Voltage type (supply voltage) |
AC/DC |
| Wall mounting possible |
true |
| Width |
60 |
| Width (inches) |
2.3622 inch |
| Wire connection cross section, flexible 2.5 mm² |
Conductor cross-section, flexible , min. 0.5mm² |
To use this facility please Sign In.
Sign In
{{SessionBasket.ItemCount }}
