This site uses cookies to deliver our services and provide a basic level of website functionality. The four different types of cookies are: Strictly Necessary cookies, Functionality cookies, Performance cookies and Advertising cookies. By checking the box and clicking the button below, you are informing Rapid Electronics Ltd that you agree to the use of these cookies as detailed in our Privacy Policy.

Industry Schools FE/HE Site: Industry Site: Schools Site: FE/HE Site: Mobile
{{ SessionBasket.ItemCount }}
Total: {{CurrencyCode == 'EUR' ? '€' : CurrencyCode == 'USD' ? '$' : '£'}}{{ IncVat ? SessionBasket.GoodsTotalIncVat : SessionBasket.GoodsTotalText }} Basket is empty.
Sign In/Register

Warton Metals Microprint P2010 SAC305 88.0 25-45 No Clean Solder Paste

Warton Metals Brand: Warton Metals
<P>Warton Metals Microprint P2010 SAC305 88.0 25-45 No Clean Solder Paste can be kept and used at room temperature. When stored correctly, the paste offers a shelf life of up to 12 months. (Syringes 6 months).</P><P>The unique No-Clean flux of Microprint P2010 offers excellent soldering of lead-free solder alloys. Microprint P2010 is designed for use with a variety of substrate materials including Sn/Pb, Au/Ni and OSP treated finishes.</P><P>Microprint's high stability gel eliminates solder balling and mid-chip balling due to de-structuring of the gel matrix. The synthetic gel system adopted by Microprint offers stability at least 60&deg;C higher than conventional gel.</P>
  • Fast print: 20 to 300mm/sec
  • No-clean type ROMO J-STD 004
  • Slump-free - no solder balling
  • Lead-free SAC305 alloy
  • Can be cleaned after re-flow
  • VOC free
  • Available in 40g syringes and 500g tubs
Order codeMftrs Part No.
85-6642P2010 SAC305 40g40g syringe
85-6644P2010 SAC305 500g500g tub
*Question functionality currently disabled


14 November 2015 Question by: Mr Steve Hills
Q. Hi all. I've been using this paste successfully for a little while, but am not sure of what the correct storage procedures are. The data sheet states 6 to 12 months shelf life if stored correctly, but not the correct storage requirements. Any additional information would be great. Thanks in advance. Steve Hills.
A. Hi Steve, thank you for your question. The data sheet states the following: solder paste can be kept at room temperature. Allow paste to achieve ambient temperature before use.


02 June 2015 Question by: Senthil Seveelavanan
Q. What gauge / inner diameter is the nozzle supplied?
A. Hi Senthil, thank you for your question. The data sheet can be found here. However the type of nozzles is not specified.


12 September 2014 Question by: H. Chester | Product code: 85-6642
Q. From the picture it seems that the nozzle comes with the syringe. Am I correct? Or do I have to order the nozzle as well
A. Hi H Chester. Thank you for your question. You will receive the syringe with nozzle all in one(filled with paste) and a separate plunger.