WAGO 857-1494 Opto-coupler Module DIN-rail 24VDC

A 100mA 24V DC dual optocoupler module that is supplied in a DIN-rail mounting housing just 6mm wide. The optocoupling design provides electrical isolation between the control side and the load side. The module features a flexible in-line jumper system (e.g. for supply voltages), eliminating discreet wiring.

• DPDT-CO Circuit
• 24V DC Control
• Pluggable relays can be replaced quickly and easily
• Switch status is indicated by an integrated yellow LED
• Connection via CAGE CLAMPS spring tension terminals

Type	Opto-coupler
Mounting Type	Rail
Height	94mm
Width	6mm
Length	94mm
Category	Relay and Optocoupler Modules
Coil Current	0.1A
Coil Voltage (DC)	24V DC
Colour	light gray
Connection	Push-in CAGE CLAMP®
Contact Configuration	DPDT-CO
Fine-stranded conductor max. AWG	14 AWG
Fine-stranded conductor max. mm²	2.5mm²
Fine-stranded conductor min. AWG	14 AWG
Fine-stranded conductor min. mm²	0.34mm²
Flammability class according to UL94	V0
Height inch	3.701inches
Operating Temperature	-25 to +70°C
Product Main Function	Optocoupler module
Single-stranded conductor max. AWG	14 AWG
Single-stranded conductor max. mm²	2.5mm²
Single-stranded conductor min. AWG	22 AWG
Single-stranded conductor min. mm²	0.34mm²
Stripping length of 1 mm	9mm
Stripping length up to 1 mm	10mm
Switching Voltage	60V DC
Unit Weight	KGM
Weight	27.420g
Width inch	0.236inches