WAGO 2002-1211/1000-410 2 Conductor Diode Terminal Block Grey

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit II is a 2-conductor diode terminal block with diode 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1211/1000-410
• CAGE CLAMP®S Connection
• 33 x 5.2 x 48.5mm (H x W x D)

Type	Component Terminal block
Pitch	5.2mm
No. of Ways	2
No. of Levels	1
Termination	Push-in Cage clamp
Width	5.2mm
Wire Gauge (mm²)	4mm²
Category	Rail-Mount Terminal Blocks;Component Modules
Colour	Grey
Connectable conductor materials	Copper
Connection	Push-in CAGE CLAMP®
Continuous Use Temperature	-60 … +105 °C
Current Rating	0.5A
Fine-stranded conductor max. AWG	12 AWG
Fine-stranded conductor max. mm²	4mm²
Fine-stranded conductor min. AWG	12 AWG
Fine-stranded conductor min. mm²	0.25mm²
Flammability class according to UL94	V0
Height	48.5mm
Height inch	1.909inches
Nominal cross-section mm²	2.5mm²
Product Main Function	Component terminal block with diode
Single-stranded conductor max. AWG	12 AWG
Single-stranded conductor max. mm²	4mm²
Single-stranded conductor min. AWG	22 AWG
Single-stranded conductor min. mm²	0.25mm²
Stripping length of 1 mm	10mm
Stripping length up to 1 mm	12mm
Total number of pins	2
Type of operation	Operating tool
Unit Weight	KGM
Voltage Rating	250V
Weight	5.500g
Width inch	0.205inches
Width mm	5.2mm
Wire Gauge (AWG)	22 to 14AWG
Wiring Type	Front-entry wiring