The WAGO DIN Rail Terminal Block, Spring Cage 3.5mm N/N Blue is a TOPJOBS double-level terminal with label holder.
The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.
- 2000-2234
- Blue colour
- CAGE CLAMP®S Connection
- 62 x 3.5 x 70mm (H x W x D)
- Through/Through N/N with marker carrier
| Accessory Type |
Marker |
| Used With |
Any |
| Category |
Rail-Mount Terminal Blocks |
| Colour |
blue |
| Connectable conductor materials |
Copper |
| Connection |
Push-in CAGE CLAMP® |
| Continuous Use Temperature |
-60 … +105 °C |
| Current Rating |
13.5A |
| Fine-stranded conductor max. AWG |
16 AWG |
| Fine-stranded conductor max. mm² |
1.5mm² |
| Fine-stranded conductor min. AWG |
16 AWG |
| Fine-stranded conductor min. mm² |
0.14mm² |
| Flammability class according to UL94 |
V0 |
| Height |
69.7mm |
| Height inch |
2.744inches |
| No. of Ways |
4 |
| Nominal cross-section mm² |
1mm² |
| Product Main Function |
Double-deck terminal block;Through terminal block |
| Rated current |
13.5 A |
| Single-stranded conductor max. AWG |
16 AWG |
| Single-stranded conductor max. mm² |
1.5mm² |
| Single-stranded conductor min. AWG |
24 AWG |
| Single-stranded conductor min. mm² |
0.14mm² |
| Stripping length of 1 mm |
9mm |
| Stripping length up to 1 mm |
11mm |
| Termination |
Push-in Cage clamp |
| Total number of pins |
4 |
| Type |
Terminal block |
| Type of operation |
Operating tool |
| Unit Weight |
KGM |
| Voltage Rating |
500V |
| Weight |
7.660g |
| Width |
3.5mm |
| Width inch |
0.138inches |
| Width mm |
3.5mm |
| Wire Gauge (AWG) |
24 to 16AWG |
| Wiring Type |
Front-entry wiring |
{{SessionBasket.ItemCount }}
