Voltcraft Bench Multimeters CAT I 1000V, CAT II 600V LCD TFT Display

These high quality bench digital multimeters are the ideal solution for use in the classroom, laboratory, workshop, and anywhere where precise and accurate electrical measurements are required. The multimeters can measure True rms values for AC voltage and current, as well as DC voltage and current, resistance, continuity, frequency, capacitance, diode test and temperature. CAT 1 1000V and CAT II 600V compliance also assures your safety when measuring high values. The units each have a TFT LCD display with a 480 x 320 high resolution, making the display easy to read. Additional features include: RS 232 interface, and data record function.

Full accuracy from 0°C to +50°C
SCPI Support
RS232 Interface
Data record function
Foot stand
CAT 1 1000V and CAT II 600V
Factory calibration ensures accurate readings
Conforms to EN 61010-1:2010 and low voltage instructions (2006/95/EC)

Order code	65-4050	65-4051	65-4052
Model	VC-7055BT	VC-7060BT	VC-7200BT
Screen	4 1/2 Digit 3.7in 480 x 320 pixels	4 1/2 Digit 4in 480 x 320 pixels	5 1/2 Digit 4in 480 x 320 pixels
Display counts	55,000	60,000	200,000
Dimensions (W x H x D)	235 x 110 x 295mm	235 x 110 x 295mm	235 x 110 x 295mm
Measurements:
DC Voltage	1000V	1000V	1000V
AC Voltage	750V	750V	750V
DC Current	10A	10A	10A
AC Current	10A	10A	10A
Resistance	50MΩ	100MΩ	100MΩ
Four-wire resistance	5kΩ	-	-
Continuity	1000Ω	1000Ω	2000Ω
Frequency	10Hz to 60MHz	20Hz to 1MHz	20Hz to 200kHz
Capacitance	50mF	20nF to 10000µF	2nF to 10000µF
Diode test	3V	3V	2V
Temperature K type	-200°C to +1300°C	-	-
Temperature PT100	-200°C to +800°C	-	-
Temperature RTD	-	-200°C to +660°C	-200°C to +660°C
Temperature TC (B, E, J, K, N, R, S, T)	-	-270°C to +1820°C (depending on probe)	-270°C to +1820°C (depending on probe)
Wave crest factor error	-	0.05% (1-2 coef) 0.2% (0.2 coef)	0.05% (1-2 coef) 0.2% (0.2 coef)