•  Change Product Range ▼

 +44 (0)1206 751166  

Welcome, to enhance your experience we have divided our site into the following sectors. Please choose the one most relevant to you and continue.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the Rapid website. However, if you would like to, you can change your cookie settings at any time.

Your Basket is Empty
Currency: GBP
 

PowerPax UK SW3376 Mini Open Frame PSU 5VDC 2.3A

 Report an error

PowerPax UK
PowerPax UK
MPN : SW3376


You may also like
PowerPax UK SW3376 Mini Open Frame PSU 5VDC 2.3A

Order Code:

85-2251

 

( Write a review )

Price per unit
QtyEx Vat
1+£8.47
10+£7.61
25+£7.19

Get a quote for large quantities here


In Stock
Same day despatch


  View Full Product Range (6)


 

This open frame switch mode power supply is designed to provide single regulated outputs from small and compact units that are manufactured to a very high quality.


  • Supplied as 5V, 2.3A
  • Universal AC input/full range
  • Short circuit, overload and overvoltage protection
Input voltage100-240V AC 50/60Hz
Range voltage90-264V AC 47/63Hz
Output power12W
Overcurrent protection120% min.
Overvoltage protection120% min.
Short circuit protectionAuto recovery
Load regulation±5%
Efficiency70% min.
Withstand voltage3000V AC (between input and output @10mA max.)
Insulation resistance100MΩ @500V DC (between input and output)
Operating temperature0°C to 40°C @5-95% RH
Storage temperature–20°C to +85°C
Input connector typeJST B3B-XH-A
Output connector typeJST B4B-XH-A
Connector terminal pinSXH-001T-P0.6

Question by Mr geoff hackett | Product code: 85-2251
19 October 2015

Q these connectors have been discontinued. Please what is the replacement part for them please. Geoff
A Hi Geoff, thank you for your question. Please see 22-5362 (3 way), 22-5364 (4 way) and 22-5374 (pins).

Question by Mr Vaughn Lucock | Product code: 85-2251
16 September 2015

Q As not knowing too much about 'switch mode' supplies like this, is it rectified sufficiently to power a raspberry Pi plus added circuitry up to its power rating? Many thanks VL
A Hi Vaughn, thank you for your question. This will be OK for a Raspberry Pi.

Question by Steve Graham | Product code: 85-2251
19 October 2015

Q Hi I bought one of these power units from you but I can't identify the connectors I need to connect to it. In the description it says: JST B3B-XH-A JSTB4B-XH-A What are the Rapid electronic part numbers for these connectors and any terminal pins etc I may need?) Thanks Steve
A Hi Steve. Thank you for your question. The part numbers required are as follows: 85-2282 (3 way), 85-2283 (4 way) and 85-2284 (terminal pins).


loading