Genie 08 Jukebox PCB

The Genie 08 Jukebox PCB is the bare PCB from the GENIE 08 Jukebox Kit which is a fun introduction to the GENIE microcontroller system with spaces for stereo sounders and lights to flash. It also has space for a push button your code can watch for user input making it an interactive project. There are spaces for two LEDs, and 2 x sounders for making tones. Once you have gathered the parts and assembled the board, use the GENIE Flowchart programming system to create programmes which you can download to your Jukebox Kit and test.

Supplied as a bare board only, the parts list and the instructions are in the PDF on this page. Once assembled, connect it to a PC running the GENIE software and start coding.

• Flash LEDs and make tones
• Read the push button
• Free, user-friendly GENIE Flowchart programming software
• Learn soldering, coding and debugging
• Measures 49 x 52mm

A programming download cable is also required, choose from a serial cable (13-0847) or a USB cable (13-6023).

Type	Jukebox kit