Make it easy to detect voltages with the Fluke LVD2 Volt Light non-contact voltage detector.
Styled like a pen and equipped with a white LED flashlight, this CAT IV 600V rated voltage detector flashes blue within 125mm of the voltage source, and then red within 25mm. So users can safely and accurately determine the presence of AC voltage up to 600V without the risk of contact.
The ultra-bright white LED flashlight in the voltage detector is good for 100,000 hours of use, and is powered by an AAA battery (supplied).
- Dual Sensitivity
- LED light with 100,000 hour life
- Detects from 90 to 600V AC
- Rated to CAT IV 600V
- Dual Levels of Detection
- Blue indicates proximity to AC Voltage source
- Red indicates you are at the source
- Operating temperature 0°C to 50°C
- Ultra-Bright White LED
- AAA battery included
| Maximum Voltage |
90 to 600V |
| Display Type |
LED |
| Background lighting LC-indication |
false |
| Blade Length |
N/A |
| Blade Width |
N/A |
| Contactless voltage detection |
true |
| Continuity indication |
N/A |
| Continuity test |
false |
| Current supply |
Battery |
| Data hold |
false |
| Indication of direction of field rotation |
false |
| Insulation Test Voltage |
CAT IV |
| Internal base load |
false |
| Length |
123mm |
| Load switchable |
false |
| Measuring circuit category |
CAT IV |
| Measuring point lightning |
true |
| Probe tip protection |
false |
| Resistance measurement |
N/A |
| Resistance measuring range |
N/A |
| Single pole phase indication |
true |
| Type |
Non-contact AC voltage detector |
| Type of test |
1-pole |
| Usable at precipitation |
false |
| Voltage indication |
LED |
| Voltage measuring range |
90 - 600V |
To use this facility please Sign In.
Sign In
{{SessionBasket.ItemCount }}
