•  Change Product Range 

 +44 (0)1206 751166  

Welcome, to enhance your experience we have divided our site into the following sectors. Please choose the one most relevant to you and continue.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the Rapid website. However, if you would like to, you can change your cookie settings at any time.

Your Basket is Empty
Currency: GBP

IMO SRGA-1A-SL-12VDC 12VDC Miniature High Power SPNO Sealed Relay



You may also like
IMO SRGA-1A-SL-12VDC 12VDC Miniature High Power SPNO Sealed Relay

Order Code:



Price per unit
QtyEx Vat

Get a quote for large quantities here

In Stock
Same day despatch

An SPNO relay featuring a sealed construction that is ideal for heavy duty loads.
  • Sealed type
  • SPNO contacts
  • 30A Switching capability
  • PCB Coil terminals, ideal for heavy duty load
  • 4kV Dielectric strength coil to contact
  • High switching capacity
  • UL and TUV approved

Contact arrangementSPNOSPCO
Switching current max.40A20A
Switching voltage max.28V DC/277V AC28V DC/277V AC
Switching power max.7200VA/560W4800VA/560W
Contact rating30A 240V AC/20A 28V DC20A 240V AC/20A 28V DC

Contact resistance50mΩ
Insulation resistance1000MΩ @ 500V DC
Dielectric strength2500V AC/4000V AC 1 min.
Operate time15ms
Release time10ms
Operating temperature–55°C to +85°C
Mechanical life1 x 107 ops.
Electrical life1 x 105 ops.
Dimensions30.2 x 24.6 x 19.8mm (open) 32.2 x 27 x 23.4mm (sealed)

Coil voltageSealed/OpenCoil resistancePickpup voltageDropout voltageMax. allowable voltageOrder code
12V DCSealed155Ω9V DC1.2V DC15.6V DC60-1996
24V DCSealed660Ω18V DC2.4V DC31.2V DC60-1998
12V DCOpen155Ω9V DC1.2V DC15.6V DC60-2004
24V DCOpen660Ω18V DC2.4V DC31.2V DC60-2006
12V DCSealed155Ω9V DC1.2V DC15.6V DC60-2000
24V DCSealed660Ω18V DC2.4V DC31.2V DC60-2002

Question by Steph | Product code: 60-1996
29 May 2013

Q What is the operating current of the coil ?
A Hi Steph. Thank you for your question. The coil will draw 80mA at 12V.

Question by Stephen Dorrington | Product code: 60-1996
28 May 2013

Q Im looking at making a PDU for several high powered systems i have ... Would this relay be Suffice for the job?... I need no-more than 10A current flowing through it but id rather go overkill just incase, also can i confirm that i only need 12v to activate the relay ?...
A Hi Stephen. Thank you for your question. 60-1996 would be suitable and the coil voltage is 12v.