The Weidmüller 9918870000 is a Digi Check Pro Two Pole Voltage Tester. This tester will determine the absence of voltage, voltage measurement over a wide measurement range in conformance with standards, phase sequence measurement and load connection. It is simple to operate, and the readability is good.
The tester also has other advantages, such as practical one-handed operation, visual and acoustic continuity testing, phase sequence indicator, frequency display, load connection and an integral battery.
The housing offers a perfect seal against dust and water spray and is IP 65 certified.
- Digital display of DC and AC voltages up to 690V
- Large, backlit display with additional bar graph display
- Backlight with light sensor
- HOLD function to temporarily store the measured value
- Continuity testing
- Phase testing, without a touch pole
- Phase sequence testing
- Switchable load testing
- Optical display
- One-handed operation for checking plug sockets
- Automatic battery monitoring
- Test probe lighting
- Manufacturer's part: Weidmüller 9918870000 (1152)
| Type |
Voltage Detector |
| AC voltage display |
1 - 1.000 V TRMS |
| AC voltage measuring range |
1 - 1,000 V |
| Adjustment of display backlighting |
automatic |
| Background lighting LC-indication |
true |
| Backlight |
with light sensor |
| Battery type |
1.5 V type AAA battery |
| Buzzer |
Yes |
| Continuity indication |
Optical/acoustic |
| Continuity test |
true |
| Current supply |
Battery |
| Data hold |
true |
| DC voltage display |
1 - 1.500 V |
| DC voltage measuring range |
1 - 1.500 V |
| Depth |
67mm |
| Depth (inches) |
2.6378 inch |
| Description of article |
Voltage tester up to 1000 |
| Display |
LCD digital |
| ECLASS 14.0 |
27-20-03-08 |
| ECLASS 15.0 |
27-20-03-08 |
| ETIM 10.0 |
EC000494 |
| ETIM 8.0 |
EC000494 |
| ETIM 9.0 |
EC000494 |
| Frequency measurement |
Yes |
| Frequency range, max. |
950 Hz |
| Frequency range, min. |
16 Hz |
| GTIN (EAN) |
4032248405756 |
| Height |
33mm |
| Height (inches) |
1.2992 inch |
| Hold function |
Yes |
| Indication of direction of field rotation |
true |
| Input resistance, voltage |
On operating the double |
| Insulation test |
8 kV |
| Internal base load |
true |
| Length |
235 |
| Length (inches) |
9.252 inch |
| Load switchable |
true |
| Measured capacitance value, max. |
0.05 µF |
| Measured capacitance value, min. |
1999 µF |
| Measuring circuit category |
CAT III |
| Measuring point lightning |
true |
| Measuring range category |
CAT III 1.000V / CAT IV |
| Net weight |
272g |
| Note |
Screw-on, thicker test |
| One-handed operation |
Yes |
| Peak voltage resistance |
8 kV |
| Phase sequence display |
Yes |
| Probe tip protection |
true |
| probes |
enables conscious |
| Protection degree |
IP65 |
| Rated voltage, max. |
1000 V AC / 1.500 V DC |
| Rated voltage, min. |
1 V |
| RCD circuit breaker |
The selectable load |
| REACH SVHC |
No SVHC above 0.1 wt% |
| Residual-current test |
Yes |
| Resistance measurement |
0 |
| Resistance measuring range |
0 - 1999 |
| Resistance measuring range, max. |
1999 O |
| Resistance measuring range, min. |
0 O |
| ROHS |
Conform |
| RoHS Compliance Status |
Compliant |
| SCIP |
b05b5122-6117-4cb0-b28c-df32f921fa36 |
| Single pole phase indication |
true |
| switch = 300 k? |
EN 61243-3:2015-08) |
| Test probe illumination |
Yes |
| Test probe protection GS 38 |
Yes |
| Tested and approved according to |
IEC 61243-3:2014 (DIN |
| Type of test |
2-pole |
| Usable at precipitation |
false |
| Version |
Testing tools, 2-pole voltage tester |
| Voltage indication |
LCD |
| Weight |
290g |
| Width |
264mm |
| Width (inches) |
10.3937 inch |
| Working temperature, max. |
55°C |
| Working temperature, min. |
-15°C |
{{SessionBasket.ItemCount }}
