The MICROOPTO series of solid state relays and optocouplers are high performance devices that provide specific application oriented solutions.
This MICROOPTO solenoid solid state relay is designed as a switching amplifier for actuators up to 24V DC and 10A that have inductive loads such as solenoid valves and contactors. The relay is short-circuit proof and protected against power related transients and voltage spikes by the provision of extensive protective circuitry.
- For switching valves up to 24V DC 10A
- Status display and error signalling contact if an error in output
- DIN-Rail mounting
- 6.1mm modular width
- Plug-in cross connection
| Type |
Relay |
| Mounting Type |
Rail |
| Height |
88mm |
| Width |
6.1mm |
| Length |
98mm |
| Alternative product |
TOPH 24VDC 5-48VDC10A |
| Ambient temperature |
-25 °C…60°C |
| Approvals |
CE, cULus |
| Available until |
2025-09-29T00:00:00+02:00 |
| Blade size |
0.6 x 3.5 mm |
| Certificate no. (cULus) |
E141197 |
| Certificate No. (DNV) |
TAE000033E |
| Clamping range, max. |
4mm² |
| Clamping range, min. |
0.5mm² |
| Clamping range, rated connection |
2.5mm² |
| Clearance and creepage distances for |
> 3mm |
| Coil Voltage (DC) |
33V DC |
| Colour |
black |
| Contact Type |
1 NO contact (POWER |
| Continuous current |
10 A |
| current limitation external |
overload at the output |
| Delivery status |
This article will no longer be available in the future. |
| Depth |
98mm |
| Depth (inches) |
3.8504 inch |
| Dielectric strength for control side - load 3 KVeff / 1 Min. |
Dielectric strength to mounting rail |
| Dropout Voltage |
13V |
| ECLASS 14 |
27-37-16-04 |
| ECLASS 15.0 |
27-37-16-04 |
| ence in manufacturing |
Type |
| ETIM 10 |
EC001504 |
| ETIM 8.0 |
EC001504 |
| ETIM 9.0 |
EC001504 |
| Flammability Rating |
UL94 V-0 |
| Free-wheeling diode |
MOS-FET) |
| GTIN (EAN) |
4032248716173 |
| Height (inches) |
3.4685 inch |
| Impulse withstand voltage |
4 kV (1.2/50 µs) |
| Input frequency |
50 Hz |
| Input Voltage |
19.2 - 28.8 |
| IP Rating |
IP20 |
| Leakage Current |
1mA |
| Load category |
LC A |
| Load Current |
10A |
| Load side status indicator |
LED red, short-circuit / |
| max. switching frequency (DC control |
50 Hz |
| Maximum Temperature |
+60°C |
| Min. switching current |
10mA |
| Min. temperature |
-25°C |
| Mounting rail |
TS 35 |
| MTTF |
399 a |
| Net weight |
38.81g |
| Number of Poles |
1 |
| Operating Temperature |
-20 to +60°C |
| Output Voltage |
5 - 33 |
| Package/Case |
Module |
| Pollution severity |
2 |
| Power Rating |
400 mW |
| Product information |
The cable lengths must not exceed 30 m. |
| Protection degree |
IP20 |
| Protective circuit |
Varistor, Reverse polarity |
| Protective circuit, load side |
Current sensor, Varistor, |
| Pulse load, max. current |
= 11 A (= 200 µs) |
| Rated control voltage |
24 V DC ±20 % |
| Rated control voltage (control input) |
24 V DC ±20 % |
| Rated operation current Ie |
10 |
| Rated switching current |
10 A |
| Rated switching voltage |
5...33 V DC |
| Rated voltage |
300 V |
| REACH SVHC |
Lead 7439-92-1 |
| Reach SVHC Compliant |
No |
| ROHS |
Conform |
| RoHS Compliance Status |
Compliant with exemption |
| SCIP |
d32f8e61-6733-45d6-9062-c95f9903aad6 |
| Series |
MOS |
| Short-circuit-proof |
Yes (limited for 4 h / |
| solid-state relays, you benefit from our decades of experi- |
Order No. |
| Status indicator |
Green LED |
| Storage temperature |
-40 °C...60°C |
| stranded with wire-end ferrules DIN |
(DIN 46228-1), min. |
| stranded, max. |
stranded with wire-end ferrules DIN |
| Stripping length, rated connection |
7mm |
| Surge voltage category |
III |
| Switching Voltage |
33V DC |
| Switch-off delay |
typical. 700 µs |
| Switch-on delay |
typ. 250 µs |
| Termination |
Screw |
| Throw Configuration |
SPST |
| Tightening torque, max. |
0.6 Nm |
| Tightening torque, min. |
0.4 Nm |
| Type of digital output |
Other |
| Type of output voltage |
DC |
| Type of voltage (input voltage) |
DC |
| UL 94 flammability rating |
V-0 |
| UL File Number Search |
UL Website |
| UL94 flammability rating |
V-0 |
| UL94 flammability rating component |
Component |
| Version |
MICROOPTO, Solid-state relay, Rated control volt- |
| Voltage drop at max. load |
approx. 100 mV |
| Voltage Rating |
24V |
| Width (inches) |
0.2402 inch |
| Wire connection method |
Screw connection |
| Wire cross-section, solid, max. |
4mm² |
| Wire cross-section, solid, min. |
0.5mm² |
| Wiring diagram |
Graph |
| With LED indication |
true |
{{SessionBasket.ItemCount }}
