The Tektronix TPP0200 is a 200MHz passive 10X voltage probe designed for accurate signal measurement with compatible BNC oscilloscopes. Combining high input resistance with low input capacitance, the probe helps minimise circuit loading while maintaining measurement accuracy, making it well suited to general-purpose analysis, troubleshooting and design verification tasks.
Designed for use with oscilloscopes featuring a 1MΩ / 13pF input, the TPP0200 provides 200MHz bandwidth, a typical rise time of less than 2.3ns and 10MΩ input resistance. Its passive design offers a practical balance of performance, ease of use and reliability for everyday measurements across a wide range of electronic applications.
The probe features a 1.3m cable for flexible positioning during bench testing and supports input capacitance compensation from 8pF to 18pF. With a maximum input voltage rating of 300VRMS CAT II and compliance with recognised international safety standards, the TPP0200 is suitable for use in laboratories, development environments, service applications and educational settings.
200MHz bandwidth for accurate signal measurement
10X attenuation ratio
10MΩ input resistance ±1.5%
Less than 12pF typical input capacitance
Typical rise time below 2.3ns
Compensation range of 8pF to 18pF
Compatible with 1MΩ / 13pF BNC oscilloscopes
300VRMS CAT II maximum input voltage
1.3m probe cable length
Supplied with hook tip, adjustment tool, colour bands and grounding accessories
| Type |
Passive oscilloscope probe |
| Attenuation |
10X |
| Bandwidth |
DC to 200MHz |
| Cable Length |
1.3m |
| Input Capacitance |
<12pF |
| Input resistance |
10mΩ |
| Manufacturers Warranty |
3Years |
| Maximum input voltage |
300VRMS CAT II |