These PCB mount IDC connectors from TE Connectivity are from their Micro-Match range have a 1.27mm staggered pitch. For use in fixed wire-to-board applications.
- Product type: Connector
- Connector type: Pin
- Applies to: Printed Circuit Board
- Colour: Red
- Length: 3.2mm (.125 in )
- Height: 5.1mm (.2 in )
- Number of positions per row: 9
- Number of rows: 2
- Row-to-row spacing: 2.54mm (.1 in )
- Contact plating: Tin
- Contact base material: Phosphor Bronze
- Housing material: Polyester GF
- UL flammability rating: UL94 V-0
- Mounting orientation: Vertical/180°
- Operating voltage (VDC): 100
- Contact current rating (A): 1.5
- Termination method to PCB: Through Hole
- Solder tail contact plating material: Tin over Nickel
- Mating alignment type: Polarization
- Header type: Pin Header
- Insulation diameter: .9mm (.035 in )
- Termination post length: 3.2mm (.125 in )
- Profile: Standard
- Connector system: Board-to-Board
- PCB mount retention type: Kink
- Wire/cable size: .08 -.09mm², 28 AWG
- Shrouded: Yes
- Insulation resistance (MΩ): 1000
- Contact design: Dual Beam
- Contact termination area plating material: Tin over Nickel
- Operating temperature range: -40 to +105°C
- Packaging quantity: 1
- Mftrs part no. 8-215570-8
| Type |
Board-In Connectors |
| Number of Ways |
18 |
| Pitch |
2.54mm |
| Number of Rows |
2 |
| Mounting Type |
PCB |
| Centerline (Pitch) |
1.27mm |
| Circuit Application |
Signal |
| Compatible Insulation Diameter Range |
.035 – .039 |
| Compatible With Approved Standards Products |
UL E28476 |
| Connector & Contact Terminates To |
Wire & Cable |
| Connector Height |
.2 |
| Connector Length |
1.035 |
| Connector System |
Cable-to-Board |
| Contact Base Material |
Phosphor Bronze |
| Contact Current Rating (Max) |
1.5 |
| Contact Underplating Material |
Nickel |
| Housing Material |
PBT GF |
| Insulation Resistance |
1000 |
| Operating Temperature Range |
-40 – 221 |
| Operating Voltage |
100 |
| Packaging Method |
Carton |
| Packaging Quantity |
250 |
| PCB Connector Type |
PCB Mount Paddleboard Connector |
| PCB Contact Termination Area Plating Material |
Tin |
| PCB Contact Termination Area Plating Material Finish |
Matte |
| PCB Contact Termination Area Plating Material Thickness |
118.11 – 196.85 |
| PCB Mount Alignment |
With |
| PCB Mount Orientation |
Vertical |
| PCB Mount Retention |
With |
| PCB Mount Retention Type |
Kinked Solder Tails |
| Primary Product colour |
Red |
| Row-to-Row Spacing |
.059 |
| Termination Method to PCB |
Through Hole - Solder |
| Termination Post & Tail Length |
.125 |
| UL Flammability Rating |
UL 94V-0 |
| Wire Size |
28 |
To use this facility please Sign In.
Sign In
{{SessionBasket.ItemCount }}
