Sealey SJBEX200 Jacking Beam Yankee 2tonne - Arm Extenders & Flat Roller Support

Fully certified to comply with MOT requirements for existing MOT Bays. New 2026 MOT bays only will need the additional SJBEX1700KIT to comply to the 2026 specification requirements. 1.6m Load arm reach. Beam Lift: 95-300mm. 2-Stage mechanical safety lock and telescopic finger guards. Spring loaded flat arms with roller bearings when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp but when loaded, locate the unit firmly. Optional hook arms supplied. Supplied with two pairs of aluminium support blocks. Wide lift configuration meets MOT recommendation for lifting on jacking point.

• Fully certified to comply with MOT requirements for existing MOT Bays. New 2026 MOT bays only will need the additional SJBEX1700KIT to comply to the 2026 specification requirements.
• 1.6m Load arm reach.
• Beam Lift: 95-300mm.
• 2-Stage mechanical safety lock and telescopic finger guards.
• Spring loaded flat arms with roller bearings.
• Optional hook arms supplied.
• Supplied with two pairs of aluminium support blocks.
• Wide lift configuration meets MOT recommendation for lifting on jacking point.
• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.
• Model No. SJBEX200

Type	Jacking Beams
Load Capacity	2tonne
Beam Lift	95-300mm
Capacity	2tonne
Load Arm Reach	850-1600mm
Nett Weight	94kg
Optional Accessories	n/a
Support Arm Reach	780-1075mm