RVFM Single Output Shaft Inline Motor and Gearbox 1:200

Order Code:

37-1214

Copy to clipboard

( Write a review )

Brand: RVFM Copy to clipboard MPN: 37-1214 Copy to clipboard

RoHS Compliant
Country of Origin: China

Report an error

Discontinued

Product Details
Data Sheets

A single output shaft inline motor and gearbox assembly. The gearbox delivers a ratio of 1:200 and is made from high quality plastic. Ideal for use in the construction of robotics and other models. All that is needes is to add wheels, hubs or tracks.

Single output shaft
Gear Ratios: 1:200
Power: 3 to 12V DC
Single motor
Without loading: 40-230mA / 25-100rpm
Output torque: 2-12Kgf.cm
Weight: 31.9g
Size 68 x 20mm
Shaft: 4mm flat edged, 5mm long

Nominal Voltage	3 to 12V
Max Torque	117Ncm
Speed (No Load)	25rpm
Speed (Max Torque)	100rpm
Current (No Load)	40mA
Current (Max Torque)	230mA
Input Power (Max Torque)	N/A

Technical Specification

Questions

*Question functionality currently disabled

18 February 2019 Question by: Rapid Customer | Product code: 37-1214

Q. Is this Bi-Directional?

A. Hi Dominic, thank you for your question. These will operate in both directions.

24 October 2018 Question by: Rapid Customer | Product code: 37-1214

Q. Hi, do you supply any wheels or adapters for wheels to fit directly onto the output shaft? What is the diameter and run-out length of the output shaft?

A. Hi Ingar, thank you for your question. We do not have any wheels that would fit directly. The shafts are not directly round as they have flat ends, please see the data sheet. The length of the shafts are 6.15mm each and 4.8mm wide.

30 August 2017 Question by: Rapid Customer | Product code: 37-1214

Q. What is the gear ratio of this motor? Does it mean for every one turn of the motor, the output shaft turns 200 times or is it the other way around?

A. Hi Hamish, thank you for your question. Every 1 turn of the shaft equals 200 turns of the motor.

07 December 2012 Question by: Rapid Customer | Product code: 37-1214

Q. What is the height?

A. Hi Lewis. Thank you for your question. According to the dimensions on the data sheet, this motor and gearbox is 69.4 long ( including connections) x 33.3mm wide (including drive shafts) and 22.3 tall/thick/high.