Auto reset Bi-Metallic switch, 70°C opening temperature, 90°C closing temperature, 1500V AC dielectric strength, SPST, NO contacts, 120 to 240V AC voltage, 15A current, A range of 1/2in disc insulated normally open bi-metallic switches are automatically reset within a close tolerance band, contacts are isolated from the mounting base, connection is via 6.35x0.8mm fast-on terminals, switches are mounted via two screws through a rotating collar to assist with installation, UL, CSA and VDE approved.
Q. Hi
I am looking to make the exhaust alarm featured in Practical boat owner but was wondering if there is a 'band type' 70 or 90 degree norm open thermal switch. I am short of space and a band that clamps around my exhaust hose would be better. Any suggestions?
Regards
Gary
A. Hi Gary. Thank you for your question. The parts for the practical boat owner exhaust alarm are as follows: We don’t have any type of sensor unfortunately.
90 degree switch: 26-7430>
Siren:35-3538
Test button:78-0110
Q. Hello. I want to make an exhaust temperature alarm for a boat. Is this switch suitable for use in a 12v circuit? Thank you.
A. Hi Steve, thanks for your question. Is this the alarm project in the 'Practical Boat Owner' magazine? If so, the parts for the project are as follows: 26-7430 is the correct part for the 90 degree switch. The Push to test button is 78-0110 and the siren is 35-3538. We hope this helps.