Industry Schools FE/HE Site: Industry Site: Schools Site: FE/HE Site: Mobile
  • Suggested Queries

Kingbright LEDs 3mm 5V and 12V

<P>The Kingbright LEDs 3mm are a superb, high quality range of components incorporating an inbuilt series resistor enabling the LED to be directly connected to 5V or 12V supply lines.<BR><BR>Tough, reliable and built to last, these high intensity components have been manufactured with only the best materials - the color devices are made with Gallium Arsenide Phosphide. <BR><BR>Overall, these unique 3mm LEDs, along with low power consumption, offer excellent value and are a clear leader in their field - to find out more about the full range of Kingbright products please visit Rapid's <A href="/brands/kingbright">Kingbright </A><HTTP: Kingbright key_brands>page.</P>
  • High intensity
  • Colour matched and housed in diffused coloured packages
  • Cathode identified by shorter lead
  • Kingbright L-7104 series (formerly L-934V)
  • Low power consumption
  • Long life - solid state reliability
  • General purpose leads
ColourWavelengthLum. int. (mcd)IFVFPtotViewMftrs.
(nm)max. (mA)max. (V)max. (mW)anglept. no.
5V HE red6252517.568540°L-7104ID-5V
5V Yellow5881517.568540°L-7104YD-5V
5V Green5682517.568540°L7104GD-5V
12V SB Red64012011.51412040°L-7104SRD-12V
12V HE Red6252011.51412040°L-7104ID-12V
12V Yellow5881111.51412040°L-7104YD-12V
12V SB Green5682011.51412040°L-7104-SGD-12V
12V Green5682011.51412040°L-7104GD-12V
12V White0.31/0.31 *1900101412034°L-7104PWC-Z-12V
* Chromaticity coordinates
*Question functionality currently disabled

21 October 2013 Question by: Rapid Customer | Product code: 56-1458
Q. could uoy please tell me if you sell a similar item in white. If not what is the nearest alternative
A. Hi Derek. Thank you for your question. The white version in this range is 55-1909.

19 December 2012 Question by: Rapid Customer | Product code: 56-1450
Q. do i need resistors to run my leds of my model railway 12volt supply my leds are L-7104GD-12V AND L-7104ID-12V, and if so which type and size
A. Hi Kevin, thanks for your question. No resistor is required if the LEDs are 12V and the supply is 12V – it is only if the supply voltage is greater than the LED voltage that a resistor is required to “lose” the excess voltage.

08 March 2012 Question by: Rapid Customer | Product code: 55-1909
Q. would these led be suitable for model making with direct 12v supply eg (scalextric cars )
A. Thanks for your enquiry. Yes these will be ideal for this application.