| Qty | Unit Price (Ex VAT) |
|---|---|
| 1+ | £12.04 |
Switches on other devices with the built-in relay contact after pushing the button and automatically switches them off again after a set time. The time can be stopped any point by pressing the second button. Two push buttons are required for use.
Connection via flat plug on the module · 2 LED display (1 x LED operating voltage, 1 x LED relay "ON" ).
| Type | Time switch |
|---|---|
| Soldering Required | No |
| Pack Size | 1 |
| Current Consumption | 80ma |
| Dimensions | height: 38mm |
| Power | 12 to 15V |
| Time range(s) | 2 s - 23 min |
| Version | Component |
Q. Can this be put on the output of a 12v dc analog train controller so that a child can press one button and the train runs for a set time e.g. 2mins?
A. Hi John, thanks for your question. Yes this can be adjusted to run for 2 minutes. Please see the full manufacturer's data sheet here.
Q. Can it be retriggered by pressing the on button
A. Hi Henrie, thank you for your question. We would expect the delay or time setting to be activated when pressing the button so this would continue with each button push.
