The ABUS MK4200 Opening Detector for Steel Doors is a magnetic contact for protecting large (garage) doors - the unauthorised opening is detected and reported to the alarm panel. This opening detector is ideal for fitting to steel and metal doors - its special construction enables its use on these materials.
The detector consists of a magnetic contact (reed) and a magnet that are fitted parallel to each other. The electric circuit of this NC opening detector is normally closed (NC). If the distance between reed and magnet increases, the circuit is broken and an alarm reported. Its extremently robust aluminium housing protects it from damage even when driven over. The door opening detector for steel doors is VdS certified.
NC switch contact and tamper loop1.2m cable/4-coreHigh sensing distance, high resistance to wear and tearFor mounting on all kinds of material, especially steel doorsMK420019 x 80 x 18mm (W x H x D)NC, max. contact capacity 200V DC/AC/1A/10WMagnetic field measurementNo stray-field protectionAluminium housing material4-core cable type1.2m cable length55°C max. operating temperatureSetup, sensing distance to metal 14mm, sensing distance to non-metal 21mmTamper monitoringIP65 protection classSensor typeVdS B certified