Schneider VCCF2 40A TeSys Vario E-stop Disconnector Switch

MPN
VCCF2
EAN-13
3389110449327
Order Code
66-1919

Discontinued


An emergency stop switch disconnector from Schneider Electric's VCCF series.

The switch is designed to mount at the back of an enclosure and is supplied with an extension shaft, allowing the switch actuator to be mounted on the front panel of the enclosure.


  • Current rating: 40A
  • 3 NO contacts
  • Schneider Electric type VCCF2
Type Disconnector
Actuator Style Handle
Colour control element Red
Conditioned rated short-circuit current Iq 10kA
Degree of protection (IP), front side IP65
Degree of protection (NEMA) N/A
Depth N/A
Device construction Built-in device fixed built-in technique
Height 74mm
Interlockable true
Max. rated operation voltage Ue AC 690V
Motor drive integrated false
Motor drive optional false
Number of auxiliary contacts as change-over contact 0
Number of auxiliary contacts as normally closed contact 0
Number of auxiliary contacts as normally open contact 0
Number of Poles 3
Number of switches 1
Rated operating voltage 690 - 690V
Rated operation power at AC-23, 400 V 15kW
Rated operation power at AC-3, 400 V 11kW
Rated permanent current at AC-21, 400 V 40A
Rated permanent current at AC-23, 400 V 29A
Rated permanent current Iu 40A
Rated short-time withstand current lcw 0.48kA
Suitable for distribution board installation false
Suitable for floor mounting false
Suitable for front mounting 4-hole true
Suitable for front mounting centre false
Suitable for intermediate mounting false
Switching power at 400 V N/A
Type of control element Door coupling rotary drive
Type of electrical connection of main circuit Screw connection
Version as emergency stop installation true
Version as main switch true
Version as maintenance-/service switch false
Version as reversing switch false
Version as safety switch false
Voltage release optional false
Width 60mm
Width in number of modular spacings N/A
With pre-assembled cabling false

Trustpilot