| Qty | Was | Unit Price (Ex VAT) |
|---|---|---|
| 1+ | £27.61 | £25.58 |
| 5+ | £24.76 | |
| 10+ | £23.62 |
A rugged hand-driven centrifuge consisting of die-cast metal parts and a steel pinion and worm drive. The centrifuge has 4 buckets that take 15ml glass or plastic tubes.
| Type | Hand-driven centrifuge |
|---|---|
| Scratch-resistant | epoxy coated body |
To use this facility please Sign In.
Sign InQ. Hi - you recommend the tubes 52-1903 for use with this centrifuge. Do these tubes have a lip? They will need a lip otherwise they will throw straight out of the centrifuge. Please could you confirm that these tubes have a lip. Thanks
A. Hi Robin, thank you for your question. These do not have a lip but the tubes are designed to be place in the buckets on the centrifuge.
Q. Do you sell the 15ml glass or plastic tubes for this centrifuge?
Q. What is the maximum RPM of this centrifuge? Or an estimate...
A. Hi Rory, thank you for your question. The manufacturer does not state a maximum RPM as the unit is only designed to be driven by the hand crank.
Q. I need to spin down 4 vacutainer bottles - 9ml volume each. This sounds ideal? Thanks.
A. Hi Paul, thank you for your question. The holder will take a maximum 20mm width.
Q. Hi, what is the tube diameter that can fit in?
A. Hi John, thank you for your question. 21.3mm is the maximum hole size for tubes.
Q. Hi, are there any particular health and safety guidelines when operating this item, we are sourcing for a client who may need to be made aware of best use considerations etc.
A. Hi P Taylor. Thank you for your question. There are no particular H & S considerations associated with this - it's a low tech hand operated product - turn the handle and the top spins.
Q. Hi, can you buy spare parts for this centrifuge and can you supply instructions as non are in the box. Thanks Pete
A. Hi Peter. Thank you for your question. We are unable to get hold of spare parts for the unit as we get them from the far east. No instructions are supplied as it is fairly obvious of how to use the product, just turn the handle etc.
Q. Hi, is product Nr. 06-6900 suitable to separate blood serum? Thank you!
A. Thanks for your enquiry. Yes this product would be suitable for seperating blood serum.
This little centrifuge is perfect for occasional use and small samples. Our only word of advice/caution is make sure you do not clamp it on to your best work surface as it needs to be tightly clamped and can damage the surface as it did in our lab.
