Data transfer is performed serially. Basically, the EIB installation consists of sensors = issuers of commands (such as light barriers, switches, thermostats, infrared, wind meter, timer clocks) and actors = command receivers (e.g. motors, heating, fans, lamps, blinds).
The EIB bus cable can be laid on, in and under plaster, in pipes and cable channels, in dry, damp and wet rooms.
| Colour |
Green |
| Number of Cores |
4 |
| Conductor Cross Section |
0.80mm² |
| Insulation Material |
PVC |
| Length |
100m |
| Type |
UNITRONIC® BUS |
| Bend radius |
10 x external dia., when permanently installed |
| Bend radius (no. of ODs for fixed installation) |
10 |
| Cable Diameter |
6.60mm |
| Cable features |
Shielded |
| Halogen-free |
No |
| Max. temperature range (fixed installation) |
+70°C |
| Max. temperature range (flexible installation) |
+70°C |
| Min. temperature range (fixed installation) |
-30°C |
| Min. temperature range (flexible installation) |
-30°C |
| Misc Attribute 1 |
UNITRONIC BUS EIB 2X2X0,8 |
| Misc Attribute 2 |
For fixed installation |
| Operating capacity |
(800 Hz) max. 100 nF/km |
| Packaged |
Yes |
| Peak operating voltage |
(not for heavy current applications) 250V |
| Shielded |
Yes |
| Sold by Metre |
No |
| Standards |
EIB |
| Temperature Range |
When permanently installed: -30 - +70°C |
| Test voltage |
Ader/Ader: 4000V |
| Twisted pair cabling (part 1) |
Yes (1) |
To use this facility please Sign In.
Sign In