Edu-Logger Heart Rate and Pulse Logger Sensor

This sensor can be used to monitor and compare pulse rates under various exercise and rest conditions and to compare the "normal" and "after exercise" pulse rates. Additionally, it can show how blood volume/flow rates in the finger or ear lobe vary with time.

The sensor has two modes of operation: measuring the BPM (Bits Per Minute) of the heart rate or displaying the analog arbitrary value of the measured signal.

• The electrodes are both plethysmograph-based and so record changes in blood volume/flow.
• The sensor consists of an infrared LED transmitter and a matched infrared phototransistor receiver.
• For best results, the sensor should be kept away from direct sunlight and high intensity lights.

• The electrodes are both plethysmograph-based and so record changes in blood volume/flow.
• The sensor consists of an infrared LED transmitter and a matched infrared phototransistor receiver.
• For best results, the sensor should be kept away from direct sunlight and high intensity lights.

Sensors must be used with the Edulogger USB module (available as Rapid part 53-1112) or the Wi-Fi module.