19.1mm Edge Holding Support Tehcbs-12-01 - Pack of 25

These 19.1mm Edge Holding PCB supports will allow the mounting of a PCB directly on to the chassis. It will allow the panels, and particularly the printed circuit board to be insulated from one another. The structure used for effecting the stacking allows the board to be detached to permit repair or replacement of the panels or boards.

The support is pushed through the hole in the panel, and the bottom is screwed to the chassis giving superior strength and durability.

• Easily dismantled for change or repair
• Provides an extremely strong hold to the chassis
• TEHCBS series requires a self-tapping screw
• Top hole: Snap lock 4mm ±0.08mm / Panel thickness: 1.57mm
• Bottom hole for metal: Requires a self tapping screw
• Joint PCB with Chassis
• Provides distance, space and support between chassis and circuit boards
• Snap fit to joint PCB with chassis or other PCB
• Locking arm clip design
• Manufactured from Nylon 6.6
• Colour: Natural
• Temperature range -40°C to +85°C
• RoHS compliant
• UL Flame rating V-2
• Supplied in pack of 25

Between Board Height	19.1
Material	Nylon