The Aim-TTi CPX400S is a new single output version of the best
selling CPX400 series. The ultra-compact design (quarter rack 3U) takes up
minimum space for bench or system use. PowerFlex regulation enables the 420W of
power to be configured to suit each specific application.
The PowerFlex regulation system used on the Aim-TTi CPX400S combines
a high frequency pre regulator with a linear post regulator to give both low
noise and good transient response. Each output can operate in constant voltage
or constant current mode with automatic crossover and mode indication.
Separate voltage and current meters on each output give a resolution of 10mV
and 10mA. The fixed resolution avoids the misinterpretation of readings that can
occur with auto-ranging 3 or 3½ digit meters where the decimal point position
moves as the reading changes. Coarse and fine voltage controls are provided. The
current control is logarithmic enabling low current levels to be set accurately.
A view settings button enables limit settings to be checked and adjusted at any
time.
Each output incorporates remote sense terminals that can be enabled or
disabled at the flick of a switch. Remote sensing is essential for maintaining
precise regulation at the load and true metering of the load
voltage.
- PowerFlex design gives variable voltage and current combinations
- Up to 60V and up to 20A per output (420W maximum)
- Constant voltage or constant current operation
- Low output noise and good transient response
- PowerFlex or fixed-range operation plus custom limits
- True analogue controls with digital settings locking
- Outputs can be wired in series or parallel for 120V or 40A
- Variable OVP trips; safety binding-post terminals
- 4 digit fixed resolution meters; selectable remote sensing
- Compact ½ rack 3U case (dual) or ¼ rack 3U case (single)
- Isolated analogue control interface
- Manufacturers part no. Aim-TTi
CPX400S
Not recommended for use as a battery charger.
Number of Outputs |
1 |
Output Voltage Min. |
0V |
Output Voltage Max. |
60V |
Output Current Min. |
0A |
Output Current Max. |
20A |
Power Rating |
420W |
Supply Voltage Range |
110 / 240V |
Temperature Range |
+5 to +40°C |
To use this facility please Sign In.
Sign In