Pico PP357 Coil On Plug (COP) and Signal Probe With TA033 BNC To BNC Lead 3m

The Coil-On-Plug (COP) ignition probe is the fastest way you can check coil-on-plug ignition coils and spark plugs.

With the new COP ignition systems the ignition coils are connected directly to the spark plugs, eliminating the need for the spark plug wires. With no high-voltage spark wires, and associated wiring looms, COP ignition systems reduce manufacturing and repair costs, and improving ignition performance and reliability.

The probe works with most COP systems; it requires no special adaptors, no foil strips, and no batteries. The probe eliminates the need for back-probing: to use the probe simply press the probe against the coil.

The BNC to BNC cable is the ideal way to connect the COP probe to your automotive oscilloscope. Along with testing COP systems, the probe can also be used to obtain a secondary ignition waveform on conventional ignition systems.

• Find misfires fast
• Gives scope patterns of the secondary, faster than scoping the primary
• Works on all labscopes capable of displaying ignition patterns
• Suitable for use on most COP and conventional ignition systems
• Long probe (36cm inches including handle)
• No batteries required