The ABUS BW8085 Xevox 360° is a motion sensor with one PIR sensor that reacts to heat movement and reports it to the alarm panel.
Installed on the ceiling, this sensor monitors the whole room with a detection range of 360°, meaning the sensor has the complete room under control. The aperture angle of the lens is 110° - for example, if the Xevox 360° is installed at a height of 4m, it monitors a cone-shaped space with a diameter of 13m at ground level. At 1.2m above the ground, the diameter of the monitored area is 8m. It is particularly suitable for monitoring large, underground corridors.
The optimum installation location of the Xevox 360° is the centre of the ceiling, meaning the intruder's possible direction of movement should be at right-angles to the sensor. Do not install the sensor near to sources of heat. By means of a jumper, you can change the sensitivity of the Xevox 360° motionsensor. This way you can define the number of pulses that have to be detected before the sensor opens the alarm relay.
BW8085Microprocessor-controlled PIR sensor with 360° detection rangeHigh room exploitationDetection diameter: 13 m diameter at 4 m heightWalk-test functionTamper protection135 x 27mm (H x D)NC, 50mA, 24V DCHeat detectionAutomatic adjustable sensitivity8m detection rangeABS housing materialPulse selector0.135 power consumption 55°C max. operating temperatureCeiling installation location0.112kg net weightTamper monitoringDual PIR elementVoltage monitoring9-16V DC voltage supplyStatus display15mA power consumptionCreep zoneWhite light filter