•  Change Product Range 

 +44 (0)1206 751166  

Welcome, to enhance your experience we have divided our site into the following sectors. Please choose the one most relevant to you and continue.

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the Rapid website. However, if you would like to, you can change your cookie settings at any time.

Your Basket is Empty
Currency: GBP

Arduino Mega ADK for Android A000069 Rev 3 Board


MPN : A000069

You may also like
Order Code:



Price per unit
QtyEx Vat
MOQ is 45

In Stock
Same day despatch

The Arduino ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

Similar to the Mega 2560 and Uno, it features an ATmega8U2 programmed as a USB-to-serial converter. Revision 2 of the MegaADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode. Revision 3 of the board has added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin it also has a stronger RESET circuit.

The Arduino ADK can be powered via the USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC to DC adaptor or battery. The adaptor can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.
  • Microcontroller ATmega2560
  • Operating voltage 5V
  • Input voltage range nom. 7 to 12V
  • Maximum supply voltage 6 to 20V
  • Digital I/O pins 54 (of which 15 provide PWM output)
  • Analog input pins 16
  • DC Current per I/O pin 40mA
  • DC Current for 3.3V pin50mA
  • Flash memory 256 KB of which 8 KB is used by bootloader
  • SRAM 8 KB
  • Clock speed 16MHz
  • USB Connector type B Male

Order codeBoardOrder codeBoard
73-4440Uno Rev. 373-4730Esplora
73-4443Uno SMD Rev. 373-4742Arduino Robot
73-4441Leonardo with headers73-4744Yun
73-4485Leonardo without headers73-6508Yun with PoE
73-4445Due ARM Cortex M373-6060Leonardo Ethernet
73-4450Mega2560 Rev. 373-6061Leonardo Ethernet with PoE
73-4487Mega ADK for Android Rev. 373-6509M0 Pro
O'Reilly 9781449309879 Getting Started with Arduino 3rd Edition

Order Code: 97-2104

MPN: 9781449309879

Price per unit
In Stock
Same day despatch
Accessories O'Reilly 9781449309879 Getting Started with Arduino 3rd Edition 97-2104 13.25000 O'Reilly 1 /o-reilly-9781449309879-getting-started-with-arduino-3rd-edition-97-2104
O'Reilly 9781449392437 Making Things Talk 2nd Edition

Order Code: 97-2122

MPN: 9781449392437

Price per unit
Limited, until stocks are exhausted
Same day despatch
Accessories O'Reilly 9781449392437 Making Things Talk 2nd Edition 97-2122 12.50000 O'Reilly 1 /o-reilly-9781449392437-making-things-talk-2nd-edition-97-2122

Be the first to ask a question