Industry Schools FE/HE Site: Industry Site: Schools Site: FE/HE Site: Mobile
 +44 (0)1206 751166  
Currency: {{CurrencyCode}}    

Winstar WH1601A-TMI-JT 16x1 LCD Display Blue Negative Mode White LED Backlight

Order Code:



Price per unit
Qty Ex Vat
1+ £5.17
10+ £4.71
25+ £4.42
50+ £4.03

Get a quote for large quantities here

22 In Stock
Same day despatch

  • {{attr.Name}}


  View Full Product Range (3)

A 16 x 1 LCD display that has a transmissive type 6 o'clock display with a STN negative blue LCD module that has a white LED backlight.

Order code57-221857-222057-2222
Mftrs. pt. no.WH1601A-NYG-JTWH1601A-YYH-JTKWH1601A-TMI-JT
Module dimensions (mm)80 x 36 x 9.780 x 36 x 13.280 x 36 x 13.2
LCD typeSTN positive, yellow/green, reflectiveSTN, positive, yellow/green, transflectiveSTN negative, blue, transmissive
Backlight typeNoneLED Yellow greenLED White

Supply voltage for logic max.7V
Supply voltage for LCD max.13V
Supply current typ.1.2mA
Number of characters16 characters x 1 lines
View area (mm)66 x 16
Active area (mm)59.62 x 6.56
Dot size (mm)0.55 x 0.75
Dot pitch (mm)0.63 x 0.83
Character size (mm)3.07 x 6.56
Character pitch (mm)3.77 x 6.56
View direction6 o'clock
Operating temperature–20°C to +70°C

Be the first to ask a question it's Arduino compatible.
Reviewed by: Adj
26 September 2013

Wired it up for an Arduino project and programmed in less than half an hour. The start up routine in the datasheet was invaluable and on the whole, the product is a good buy. The address seems a little quirky though: characters 1-8 are at address 0x00 - 0x07, while chars 9-16 are at 0x40 - 0x47, adding to program complexity. Also note that for displays with backlights, pin 15 is LED supply and pin 16 is ground; the datasheet is only applicable for the reflective display in that respect. Easy to solder, easy to use.