Kemo M156 Power control Sensor Component 220 - 240 VAC

This power controller module is ideal for both resistive loads and motors, and can be operated either via a pushbutton or a touch sensor contact.

When the button is pressed, it automatically increases the power up and down again approximately every 5 to 9 seconds. When the button is released, the power level is set and remains at that level. If the button is pressed again briefly, the power controller turns off. Pressing again briefly, turns it back on at the last setting. To change the setting, the button is pressed and held as before.

• Operation: by means of push-button or sensor contact (not included)
• Dimensions: 80 x 56 x 23mm
• Operating voltage: 220 to 240V AC
• Pulse frequency: Approx. 5 to 9 seconds for 1 cycle
• Output power: 6A max.
• Kemo type M156