This site uses cookies to deliver our services and provide a basic level of website functionality. The four different types of cookies are: Strictly Necessary cookies, Functionality cookies, Performance cookies and Advertising cookies. By checking the box and clicking the button below, you are informing Rapid Electronics Ltd that you agree to the use of these cookies as detailed in our Privacy Policy.

Industry Schools FE/HE Site: Industry Site: Schools Site: FE/HE Site: Mobile

Rohde & Schwarz HM8118 3593.0539K02 LCR Measurement Bridge

Order Code:  

64-6917

 
Brand: Rohde & Schwarz  MPN: 3593.0539K02  EAN-13: 4250138102152
 Report an error
Qty Unit Price (Ex VAT)
1+ £2174.47

Get a quote for large quantities here

Units
Price per unit {{ IncVat ? 'Inc' : 'Ex' }} VAT
2 available to back OrderStandard factory lead time 7 days

The Rohde & Schwarz HM8118, 3593.0539K02 is an LCR Measurement Bridge which offers a wide measuring frequency range of 20Hz to 200kHz, and a variable measuring voltage of 0.10 to 1.50 Vrms. It has a bias function for voltage 0 to 5V and a current rating of 0 to 200mA.

The HM8118 offers measurements of non ideal characteristics of real components. At the push of one button it will measure the Rs of the series equivalent circuit or the Rp of the parallel equivalent circuit of a capacitor or an inductor.

The HM8118 also calculates the derived parameters, like the quality factor Q, dissipation factor D, phase angle Theta, as well as the complex values of the impedance Z and the admittance Y.

In addition to the characterisation of passive components like L, C and R the HM8118 can determine the specific parameters of transformers, not only on the fixed frequencies 50/60 Hz and 100/120 Hz, but in the whole range of 20Hz to 200kHz.

The Rohde & Schwarz HO118 (order code 64-5503) is a Binning Interface for the HM8118 which allows the unit to operate with external hardware, which will physically sort components according to the measurement of the HM8118. Data lines for eight sorting BINs are provided, as well as control lines (ALARM, INDEX, EOM,TRIG).

What's in the Box?
Rohde & Schwarz HM8118
Power cord
Printed operating manual
HZ184 4-terminal Kelvin test cable
HZ188 4-terminal SMD component test fixture
Software CD-ROM


  • Measurement range: 20 z to 200kHz (69 steps)
  • Basic accuracy: 0.05%
  • Transformer parameter measurement
  • External capacitor bias up to 40V
  • Measurement rate: up to 12 values per second
  • Automatic or manual selection of circuit type (serial, parallel)
  • Measurement functions: L, C, R, Z, X, Y, G, B, D, Q, Δ, M, N
  • Transformer measurement: mutual inductance and ratio
  • RS-232/USB dual interface for remote control
  • Fan-less design
  • Manufacturer's part: Rohde & Schwarz HM8118

Measurement conditions and functions
Test frequency:20Hz to 200kHz (69 steps)
Frequency accuracy:±100ppm
AC test signal level:50mVrms to 1.5Vrms
Resolution:10mVrms
Drive level accuracy:±(5% +5mV)
Internal bias voltage:0 VDC to +5.00VDC
Resolution:10 mV
External bias voltage:0Vdc to +40VDC (fused 0.5A)
Internal bias current:0mA to +200mA
Resolution:1mA
Range selection: Auto and hold
Trigger:Continuous, manual or external
Trigger delay time:0 ms to 999ms in 1ms steps
Measurement time (f ≥1kHz):FAST 70 ms
MEDIUM 125 ms
SLOW 0.7 s
Other instrument functions
Test signal level monitor:Voltage, current
Error correction:Open, short, load
Save/Recall:9 instrument settings
Front-end protection:Vmax
(1 Joule of stored energy)
Constant voltage mode (25Ω source):Temperature effects R, L or C ±5ppm/°C
Interface:Dual interface USB/RS-232 (HO820)
IEEE-488 (GPIB) (optional)
Safety class:Safety class I (EN61010-1)
Power supply:110V to 230V ±10%, 50Hz to 60Hz, CAT II
Power consumption:approx. 20W
Operating temperature:+5°C to +40°C
Storage temperature:-20°C to +70°C
Rel. humidity:5% to 80% (non condensing)
Dimensions:285(W) x 75(H) x 365(D)mm
Weight:approx 4kg

To use this facility please Sign In. Alternatively use our Quotation page.

Sign In

Reviews


Be the first to submit a review