Ducati Plastic Case Motor Run Capacitors

<p>A series of metallised polypropylene film capacitors in plastic case. Designed for motor start and motor run applications.</p>

Tolerance 5%
Fitted with an M8 x 10mm stud for mounting
Terminated by double 6.3mm FASTON push-in connector
Non-inductive winding means low losses
Self-healing properties avoids short circuits
Small size and weight
No leakage risk
Case and cover made from self-extinguishing material
Capacitive element is sealed with resin
Safety protection class P0
UL 94V-0 recognised

This product is supplied without any fixing hardware.

Products
Technical Details
Questions (3)

Max. continuous voltage	450V AC
Tolerance	±5%
Dissipation factor 20°C	20 x 10^–4 (50Hz)
Temperature range	–25°C to +85°C
Approvals	VDE 560-8, CEI 33-3, SEV 1029
4.16.10 series VDE approval	400V, 10,000 hours
4.16.15 series VDE approval	400V, 30,000 hours and 450V 10,000 hours
4.16.17 series VDE approval	425V, 30,000 hours

Value (µF)	Length (mm)	Dia. (mm)	Manfr. part	Order code
1	55	28	4.16.15.69.64	10-2930
2	55	28	4.16.15.01.64	10-2932
2.5	55	28	4.16.17.03.64	10-2961
3	55	28	4.16.10.03.63	10-2934
4	55	28	4.16.10.06.64	10-2936
5	55	28	4.16.10.08.64	10-2938
8	55	32	4.16.10.13.64	10-2940
10	58	36	4.16.10.15.64	10-2942
12	70	36	4.16.10.17.64	10-2944
15	70	36	4.16.10.22.64	10-2946
18	70	40	4.16.10.24.64	10-2948
20	70	40	4.16.10.25.64	10-2950
25	92	40	4.16.10.26.64	10-2952
30	92	40	4.16.10.70.64	10-2954
40	92	45	4.16.10.29.64	10-2956
50	117	45	4.16.10.30.64	10-2957
60	117	50	4.16.10.61.64	10-2958
70	117	50	4.16.10.67.64	10-2988
80	120	55	4.16.10.87.64	10-2989
90	120	55	4.16.10.40.64	10-2991
100	120	60	4.16.10.51.64	10-2993

*Question functionality currently disabled

09 January 2014 Question by: Rapid Customer | Product code: 10-2956

Q. Does it matter which terminals attach to the leads on my generator? Is there a positive or negative side? Thanks

A. Hi Rich. Thank you for your question. As these are AC motor run capacitors they can not be polarised. So therefore there is no positive or negative connections.

26 March 2013 Question by: Rapid Customer

Q. I have a small art studio airbrush air pump compressor, the Capacitor has quite literally blown-up and I need to replace it can you help? The Old one has just two power connections one 'live' one 'neg.' it is in a black plastic outer. It was made in Denmark by a company called Tobias Jensen A/S. Kopenhagen. Here are the details as shown on the case: 69uF. -20+60.220/275 Veff. 50Hz. AB 1,7% ED DIN 48501. It measures 36mm Dia. x 100mm including it's terminal cap. Can you help or do you need further info.

A. Hi Mike. Thank you for your question. The best we can offer in this case would be 10-2986 - this is not quite the correct value but should be enough to get the compressor working.

28 February 2013 Question by: Rapid Customer

Q. I need some electronic switching motor starting capacitors, these are wired in parallel to the motor capacitor, and after starting the motor,switches out of the circuit, do you have them please.

A. Hi Derek. Thank you for your question. We have tow ranges we can offer - 62525 or 62526 - these are the best we have.