The Aim-TTi QL564P SII represents the next generation of laboratory power
supplies offering an unparalleled level of precision and performance. The
voltage and current are controlled using 16-bit DACs enabling voltages to be set
to 1mV resolution even at full output. Indeed, the accuracy is sufficient for
the PSU to be used as a calibration source for some hand-held DMMs.
The Aim-TTi QL564P SII uses pure linear technology and offers unrivalled
performance in terms of regulation, output noise and dynamics. Line and load
regulation are at the limit of measurement. Output noise is less than 350µV rms.
Recovery time from transient current pulses is better than 50µs.
The QL series provides full remote sense capability via dedicated sense
terminals. Remote sense is essential to maintain precise regulation at the load
(two 0.03Ω connection leads will drop 300mV at 5A). When remote sense is not
required, internal local sensing can be selected at the touch of a
button.
- Single output or triple output models
- Setting by direct numeric entry or spin wheel
- 1mV resolution at up to 56V
- Multiple ranges for increased current flexibility
- Multiple non-volatile setting memories
- OVP and OCP trips with alarm output
- Selectable remote sense terminals
- Linked-mode operation of main outputs (triple)
- Auxiliary output of 2.7, 3.3 or 5.0V at 1A (triple)
- Setting memories for added convenience
- Fast, simple, and safe to use
- Compact design for bench or rack
- Manufacturer's part no. Aim-TTi
QL564P SII
Not recommended for use as a battery charger.
Number of Outputs |
1 |
Output Voltage Min. |
0V |
Output Voltage Max. |
56V |
Output Current Min. |
0A |
Output Current Max. |
4A |
Power Rating |
112W |
Supply Voltage Range |
115 / 230V |
Temperature Range |
+5 to +40°C |
To use this facility please Sign In.
Sign In