The Aim-TTi PLH120-P (G) retains the ultra compact format, high power
density, and smart analog controls of the PLH120-P (G), but offers voltages up
to 120V to cover applications beyond the capabilities of standard bench PSUs and
into areas such as magnetics. This particular model is fitted with GPIB (option
G) being an (IEEE-488) interface in addition to USB, RS232 and LAN.
The Aim-TTi PLH120-P (G) achieves an exceptional power density for a
linear regulated power supply by offering up to 94W from a ¼ rack 3U sized
casing. This gives it an unusually small bench footprint taking up less space on
a crowded bench. For rack-mount application, up to four units can be mounted
into a single slot. Despite its small size and linear regulation, the Thurlby
Thandar PLH120-P (G) generates relatively little heat through the use of an
advanced phase controlled pre-regulator. This gives it significantly higher
energy efficiency than conventional linear regulated designs, particularly when
supplying voltages below maximum.
The internal heat-sinks use fan-assisted convection cooling in order to
remove the heat with minimal fan noise.
The Aim-TTi PLH120-P (G) includes all of the manual control features
of the PLH series, but adds comprehensive remote control facilities. The
ultra-compact rack-modular sizing makes it ideally suited to rack mounted system
applications, while its user-friendly manual controls are retained for bench top
applications. Power output terminals are duplicated on the rear panel for rack
mount applications or other situations where rear connection is more
appropriate.
- High performance linear regulated power supplies
- Full digital remote control and read back
- RS-232, USB and LAN (Ethernet), GPIB optional
- LAN Interface conforms with LXI standard
- Interfaces are opto-isolated from outputs
- IVI Driver supplied
- Isolated Analog remote control of V and I
- Front and rear terminals
- Selectable remote sense terminals
- Ultra-compact size of quarter-rack 3U
- High power density, up to 94W per output
- Manual control features as per PLH Series
- Manufacturer's part no. Aim-TTi PLH120-P
(G)
Not recommended for use as a battery charger.
Number of Outputs |
1 |
Output Voltage Min. |
0V |
Output Voltage Max. |
120V |
Output Current Min. |
0A |
Output Current Max. |
0.75A |
Power Rating |
94W |
Supply Voltage Range |
115 / 230V |
Temperature Range |
+5 to +40°C |
To use this facility please Sign In.
Sign In