The Aim-TTi Single PL601 achieves an exceptional power density for a
linear regulated power supply by offering up to 90 watts from a ¼ rack 3U sized
casing. This gives it an unusually small bench footprint taking up less space on
a crowded bench. For rack-mount application, up to four units can be mounted
into a single slot.
Despite its small size and linear regulation, the New PL series generates
relatively little heat through the use of an advanced phase controlled
pre-regulator. This gives it significantly higher energy efficiency than
conventional linear regulated designs, particularly when supplying lower
voltages. The internal heat-sinks use fan-assisted convection cooling in order
to remove the heat with minimal fan noise.
- High performance linear regulated power supplies
- Full digital remote control and read back
- RS-232, USB and LAN (Ethernet), GPIB optional
- LAN Interface conforms with LXI standard
- Interfaces are opto-isolated from outputs
- IVI Driver supplied
- Analog remote control of V and I
- Front and rear terminals
- Selectable remote sense terminals
- Ultra-compact size of quarter-rack 3U
- High power density - up to 90W per output
- Manual control features as per New PL Series
- Manufacturers part no. Aim-TTi
PL601
Not recommended for use as a battery charger.
Number of Outputs |
1 |
Output Voltage Min. |
0V |
Output Voltage Max. |
60V |
Output Current Min. |
0A |
Output Current Max. |
1.5A |
Power Rating |
90W |
Supply Voltage Range |
115 / 230V |
Temperature Range |
+5 to +40°C |
To use this facility please Sign In.
Sign In