A 0 to 30V, 0 to 3A power supply from Aim-TTi's PL series.
The PL series achieves an exceptional power density for a linear regulated power supply by offering up to 90 watts from a ¼ rack 3U sized casing. This gives it an unusually small bench footprint taking up less space on a crowded bench.
Despite its small size and linear regulation, the New PL series generates relatively little heat through the use of an advanced phase controlled pre-regulator. This gives it significantly higher energy efficiency than conventional linear regulated designs, particularly when supplying lower voltages. The internal heat-sinks use fan-assisted convection cooling in order to remove the heat with minimal fan noise.
- High performance linear regulated power supply
- Front and rear terminals
- Selectable remote sense terminals
- Ultra-compact size of quarter-rack 3U
- High power density, up to 90W per output
- Manual control features as per New PL Series
- Manufacturers part no. Aim-TTi PL303
Not recommended for use as a battery charger.
Number of Outputs |
1 |
Output Voltage Min. |
0V |
Output Voltage Max. |
30V |
Output Current Min. |
0A |
Output Current Max. |
3A |
Power Rating |
90W |
Supply Voltage Range |
115 / 230V |
Temperature Range |
+5 to +40°C |
To use this facility please Sign In.
Sign In