The Aim-TTi PL155-P offers remote control and read-back using analog,
RS232, USB, LAN (LXI) interfaces. They retain all of the capabilities of the New
PL Series when under manual control.
When working with any particular piece of equipment, engineers often require
a voltage source variable over only a narrow range. Set the voltage too high and
damage might occur, set it too low and the circuit may reset.
That’s where the V-Span function of the New PL series comes in. It allows the
user to redefine the end-stop values of the voltage control to define a specific
voltage range.
An engineer is working on a circuit that will eventually operate from four
NiMh cells. They use V-Span to set a Vmax of 5.8V (to prevent over-voltage
damage) and a Vmin of 3.6V (to ensure that the circuit doesn’t reset). They now
have a power supply which provides high resolution analog control over the exact
voltage range they need.
- High performance linear regulated power supplies
- Full digital remote control and read back
- RS-232, USB and LAN (Ethernet), GPIB optional
- LAN Interface conforms with LXI standard
- Interfaces are opto-isolated from outputs
- IVI Driver supplied
- Analog remote control of V and I
- Front and rear terminals
- Selectable remote sense terminals
- Ultra-compact size of quarter-rack 3U
- High power density - up to 90W per output
- Manufacturers part no. Aim-TTi
PL155-P
Not recommended for use as a battery charger.
Number of Outputs |
1 |
Output Voltage Min. |
0V |
Output Voltage Max. |
15V |
Output Current Min. |
0A |
Output Current Max. |
5A |
Power Rating |
90W |
Supply Voltage Range |
115 / 230V |
Temperature Range |
+5 to +40°C |
To use this facility please Sign In.
Sign In